If my 51XX had the reported fault , i would :-
measure C103 with meter
if short circuit or low resistance , replace C103 (1uF 35v).
95% shure this will repair
replace V100 (never seen one go faulty)
5% shure this will repair
the other 5% is that your chaps ic (N101) is faulty or energy management needs re-calibrated.
Hope this helps
C103 is the large polorised capacitor on the bottom left of pcb (mad ic side of pcb)
Last edited by M@RTY; 03-03-2002 at 05:49.
|