06-08-2018, 20:33
|
#1 (permalink)
|
Freak Poster
Join Date: Dec 2017
Posts: 439
Member: 2785090
Status: Offline
Thanks Meter: 349 | How to Flashing Huawei Board Software Huawei board software Repair for bricked / FRP / Erase Huawei Download IMAGE Software Huawei board software Download Tools Software & Drive Driver Installation Double-click the Driver Setup file to install the driver. Installation steps are not displayed because the installation is unattended. When the automatic installation is complete View the HUAWEI USB COM 1.0 of the forcible loading driver under the Device Manager Click the USB Map, after the port mapping program is started, configure the XML file (this file is an XML file mapped to the target burned version), and then connect the phone to the computer using the loading fixture or by short-circuiting the test point. The port switches from HUAWEI USB COM 1.0 to the Android Debug Bridge (ADB) port. the interface displayed after the mapping is complete. Note that power supply to the PCBA needs to be disconnected during forcible port mapping. To clear mapped ports, click Clear UsbMap. To map multiple phones at the same time, replace the USB port that connects to the computer, and map the new ports using the same method as described previously After the mapping is complete, click Done to exit the mapping window.Open IDTML01.exe
Press Icon Setting to switch to the main window of the tool- After being mapped, a port can be used directly and does not need to be mapped again.
The path of the software to be loaded cannot be too deep. Otherwise, the software cannot be properly loaded. Do not touch the USB cable during the loading process. Loading will erase the radio frequency (RF) NV information from a phone. Use with caution. After the loading is complete, RF calibration and comprehensive tests need to be performed on the phone. In some computers running the Windows 7, the software loading may fail at 40% of the progress because the ADB port is occupied. If this occurs, use the appended tool to release the ADB port, and load the software again.
================= Dont Forget To Use Only Thanks Button ================= Best Regards: Easy-Firmware Team Easy Firmware First Source Firmware in the world Download Free Stock Rom for all models Collection Of Stock ROM's Free For All
Samsung Firmware - HTC Firmware - Huawei Firmware -Zte Firmware - Gionee - OnePlus - InFocus - Panasonic - Sony - Coolpad - LG - Karbonn - Asus- Infinix - Intex - Lava - Reliance - Itel - Google - Jivi - Yu - Blackberry - Smartron - iVooMi - Swipe - Meizu - LeEco - Motorola - Lyf - I Kall - Firmware Samsung - Update Samsung - Oppo - Doogee - VOTO - XOLO - Trio - Videocon - IBall - AGM - Lemon - Umidigi - Vernee - Ulefone - Billion - Comio - Gfive - Spice - Celkon - Maxx - Nubia - Zen - Microsoft - VOX - Alcatel - Good One - Ziox - Reach - Sansui - M-Tech - Turing - BLU - Oukitel - Lephone - Philips - Black Bear - Datawind - Bluboo - Forme - Dami - Razer - Yxtel - Hi-Tech - Rom - Update And More
Last edited by Easy Support; 06-08-2018 at 21:09.
|
| |