GSM-Forum - View Single Post - riffbox error No response from RIFF Box

**legija** · 06-10-2018, 10:40

Hi,
Download this archive and extract it:
https://drive.google.com/open?id=1sy...iv-XkEO8_JGF_A

1. Disable driver signature enforcement ( https://www.youtube.com/watch?v=ccEI29E9qlE )
2. Open 32bit dir and run "Clean.bat"
3. Restart Windows
4. Run "Install.bat" (confirm installation of unsigned drivers each time)
5. Restart Windows again
6. Connect RIFF Box, start device manager -> ports -> set RIFF controll port comport number to less than 10 (e.g. 3 or 4)
7. Reconnect RIFF box and click "Firmware Update"
8. After You see "Setting Update Mode... . . ." Reconnect box on USB cable and Windows should install Update port driver automatically. If not, You need to do it manually.

In case if it fails first time, just repeat step 7.

06-10-2018, 10:40	#9 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Download this archive and extract it: https://drive.google.com/open?id=1sy...iv-XkEO8_JGF_A 1. Disable driver signature enforcement ( https://www.youtube.com/watch?v=ccEI29E9qlE ) 2. Open 32bit dir and run "Clean.bat" 3. Restart Windows 4. Run "Install.bat" (confirm installation of unsigned drivers each time) 5. Restart Windows again 6. Connect RIFF Box, start device manager -> ports -> set RIFF controll port comport number to less than 10 (e.g. 3 or 4) 7. Reconnect RIFF box and click "Firmware Update" 8. After You see "Setting Update Mode... . . ." Reconnect box on USB cable and Windows should install Update port driver automatically. If not, You need to do it manually. In case if it fails first time, just repeat step 7.