Am Back
Load firmware ok but cant write it
Code:
Card found : xxxxxxx , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR
SPRD mode : SC6531 : REV : C000 : NOR
Operation : Identify [ v1.03 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [MACRONIX] : MX25U128 : 0x01000000 [ 16MiB ]
Done!
Elapsed: 00:00:21
Reconnect Power/Cable!
Code:
BINARY : FLASH_DUMP FEDELIX MBW L18.bin
FLSIZE : 0x01000000
Load Ok!
Operation : Write Flash [ v1.03 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
BIN : Format UserData
BIN : Format UserData Ok!
Error : Flashing failed!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
ANY SOLUTION SIR