I tried to unlock using SP20010b_to_X210ULMA10d_for_unlock.oct
In the middle of Writing system section process suddenly error!
Now I can't flash because of "writing preloader failed"
Logs:
Code:
Platform: LG MTK
Selected port: COM124
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM125
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: SP20010b_00
LAF Version: 1.1
Product ID: CT66S180208008164
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: ---------------------
MEID: -------------------------2
Bluetooth address: 00:3D:E8:79:7D:10
Wi-Fi MAC address: 00:3D:E8:EF:12:1D
SPC: 089347
--------------------------------------------------------------------------------
Performed by 2.8.7.6 Software version.
Code:
Checking data...OK
Platform: LG MTK
Selected port: COM124
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM125
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: SP20010b_00
LAF Version: 1.1
Product ID: CT66S180208008164
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: -----------------------
MEID:--------------------------
Bluetooth address: 00:3D:E8:79:7D:10
Wi-Fi MAC address: 00:3D:E8:EF:12:1D
SPC: 089347
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Opening "SP20010b_to_X210ULMA10d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...Failed!
Performed by 2.8.7.6 Software version.
Please octoplus team, I need your help.
Thanks in advance.
REGARDS