| read her freind :
Use standard cable for LG8110 without USB or any driver.
about unlocking methode :
- 8110 /8120/8130/8138 : check your phone if can enter to simlock Menu by pressing : 2945#*88110# if yes juts press connect and Unlock then you enter unlock code ..if no connect your phone and then unlock and go to flash panel and change frimware of your phone .. you can flash just drive_c.ssw from exact model that you have and you will be able to enter to Simlock menu this procedure will take you about 4 Min with USb Cable and maximum bauderate.. otherwise you flash full 4 flash then you can enter to simlock menu and able to enter unlock code.
-8330/8180 :
press connect and go to flash panel add file for desired phone with *.SWS extention (this file are patched for can you enter any code in your phone)
you can download this file from 'Special Unlock Flash', i have upload two flash that i have ..if you have any new flash with other language for 8130/8138 plz send to my mail for can patch and add it.
after complet flashing just make card inside phone and tape : 2945#*88110# and enter any digit.
- 8150 :
cable are different from 8110 ,you use pinout from site and power on your phone than press Unlock.
- for repair dead phone :
- 8110/8120/8130/8138 : Connect your phone and go to Personal Flasher panel , choose correct flash and click Write ..file must have *.Bif extension.
after full flash reset your phone enter: 277634#*# or 47328545454#.
- 8330/8180 : for repair this model dead you need use Test point and select 8330/8180 with TP in soft than connect your phone. after full flash it with apropriate flash using Personal Flasher panel, after reset your phone and all is ok. Testpoint must be connected to GND when software will ask for this, i have upload it to site.
by PADERF |