| is it posible to flash emmc andriode led tv board. i try flash writen but working board gone standby . emmc connected but no firmware info .
8/8/2018 11:20:17 AM> EasyJTAG Box Firmware = 1.63
8/8/2018 11:20:19 AM> Setting frequence to 7 Mhz
8/8/2018 11:20:19 AM> CMD Pullup Level: 2083 mV
8/8/2018 11:20:19 AM> CMD Active Level: 2433 mV
8/8/2018 11:20:19 AM> eMMC Init returned = 0
8/8/2018 11:20:19 AM> EMMC Device Information :
8/8/2018 11:20:19 AM> EMMC CID: 15010034465044335202D7F9FC08537E
8/8/2018 11:20:19 AM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
8/8/2018 11:20:19 AM> EMMC Manufacture : SAMSUNG , EMMC NAME: 4FPD3R , HEX: 344650443352 , S/N: D7F9FC08 , rev. 0x02
8/8/2018 11:20:19 AM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 5/2016
8/8/2018 11:20:19 AM> EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
8/8/2018 11:20:19 AM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
8/8/2018 11:20:19 AM> EMMC RPMB (Replay Protected Memory Block) Capacity: 512 KB (000000080000)
8/8/2018 11:20:19 AM> EMMC Permanent Write Protection: No
8/8/2018 11:20:19 AM> EMMC Temporary Write Protection: No
8/8/2018 11:20:19 AM> Extended CSD Information :
8/8/2018 11:20:19 AM> Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
8/8/2018 11:20:19 AM> Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
8/8/2018 11:20:19 AM> Boot Bus Config: 0x02 , width 8bit
8/8/2018 11:20:19 AM> H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
8/8/2018 11:20:19 AM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
8/8/2018 11:20:19 AM> Device supports partitioning features
8/8/2018 11:20:19 AM> Device can have enhanced technological features in partitions and user data area
8/8/2018 11:20:19 AM> Device can have extended partitions attribute
8/8/2018 11:20:19 AM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
8/8/2018 11:20:19 AM> Backup saved: 4FPD3R_D7F9FC08_20180808_112019.extcsd
8/8/2018 11:20:19 AM> EMMC Init completed.
if posible pls add to write firmware for andriode led tv boards |