| Samsung sgh-e250 read code done
UNLOCK INSTRUCTIONS:
Phone must be powered off!
1. Select correct COM port in 'Port' options.
2. Select connection mode in options ('Flash Mode' or 'TAT Mode') .
3. Press 'Unlock' for direct unlock.
4. Press 'Read Codes' to read security codes.
5. - Flash Mode:
Connect the phone to selected port with UART cable and press 'Power' button shortly,
or just insert cable to phone if you are using auto-ignition cable .
(If you have connection problem, try to push 'Power' button while loader will be sent.)
- TAT Mode:
Connect the phone to selected port with UART cable and press 'Power' button about 3 seconds,
or just insert cable to phone if you are using auto-ignition cable .
Operation: Read Codes
Selected model: SGH-E250
Selected port: COM11 Z3X BOX Serial Port, 460800
Software version: 33.8
Connect phone, press power button
Waiting phone... OK
Setting download address... OK
Sending PRELOADER... OK
Setting download address... OK
Checking PRELOADER... OK
Checking baud... OK
Getting BB Chip version... OK
BB Chip version: 00003541
Sending LOADER... OK
Setting base address... OK
Checking Flash ID... OK
Flash ID: 00EC (Samsung) 2206 (KAP29SN00M)
Nand Flash ID: 0014 (ONE 256M NAND FLASH)
Checking LOADER... OK
Reading FLASH... OK
Phone version: E250DBVGG1_HA1
HW version: MP 0.803
Phone BT: 00:1F:CC:C5:43:02
IMEI: 352562029069500
Please wait, calculating codes... OK
Freeze code: 55169490
NET lock: 95732440
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
Multi lock: 00000000
Phone lock: 00000000
Done with Samsung Tool PRO v.33.8 |