Quote:
Originally Posted by layder HIPower mode use with 4 wire connection (CMD/CKL/Dat_0/GND), and external power (USB to PCB)
You need to set 1.8 IO levels at software, because IO signal levels at board are 1,8v amplitude. If you set 3.3 IO at box, the box wait 3,3v signal levels |
Thank you sir for the reply, I tried all things 1.8v, 2.7v and also 3.3 volts and connected all 6 points- (CMD/CKL/Dat_0/GND/1.8v and 2.8v), on adaptor with n7100 working board but still giving the same error, is there anything I am missing, do I need to buy gpg adaptor as every thread shows because that adaptor has USB port also, and in videos I have seen people inserting us cable in adaptor for additional power supply?