GSM-Forum - View Single Post

sam rehmani · 10-24-2018, 09:15

i got the xt1068 with dead emmc, how to backup the security areas in dead emmc and the procedure for programme new emmc. here are the logs -

eMMC CID : 02000053444D30333290FFFFFFFF29BC
eMMC CSD : 8C0F002A015981E9B6D9FC1F8A4040AA
eMMC Manufacturer ID: 0002 , OEM ID: 0000
eMMC Date: 02/2006 Rev.0x90
eMMC NAME: SDM032 , S/N: 4294967295
eMMC NAME (HEX): 53444D303332
EMMC ROM1 (Main User Data) Capacity: 30 MB
EMMC ROM2 (Boot Partition 1) Capacity: 0 kB
EMMC ROM3 (Boot Partition 2) Capacity: 0 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.0 (MMC 4.0)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x00
Device NOT support partitioning feature
Device cannot have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: SDM032_4294967295_20181024_1342.extcsd
Partition table scan:
GPT: not present
Done.

10-24-2018, 09:15	#1 (permalink)
sam rehmani Freak Poster Join Date: Apr 2010 Posts: 264 Member: 1291708 Status: Offline Thanks Meter: 15	xt1068 dead boot repair i got the xt1068 with dead emmc, how to backup the security areas in dead emmc and the procedure for programme new emmc. here are the logs - eMMC CID : 02000053444D30333290FFFFFFFF29BC eMMC CSD : 8C0F002A015981E9B6D9FC1F8A4040AA eMMC Manufacturer ID: 0002 , OEM ID: 0000 eMMC Date: 02/2006 Rev.0x90 eMMC NAME: SDM032 , S/N: 4294967295 eMMC NAME (HEX): 53444D303332 EMMC ROM1 (Main User Data) Capacity: 30 MB EMMC ROM2 (Boot Partition 1) Capacity: 0 kB EMMC ROM3 (Boot Partition 2) Capacity: 0 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 0 kB EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.0 (MMC 4.0) Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured. Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00. H/W reset function [RST_N_FUNCTION]: 0x00 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00000000] Partitioning Support [PARTITIONING_SUPPORT]: 0x00 Device NOT support partitioning feature Device cannot have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: SDM032_4294967295_20181024_1342.extcsd Partition table scan: GPT: not present Done.