Quote:
Originally Posted by chenzuming  pixel v1 is not emmc，this is ufs ic |
Please refer the below link, this guy has repaired his pixel v1 emmc ic with easy jtag:
http://forum.gsmhosting.com/vbb/f672...g-box-2258257/ Quote:
Originally Posted by layder It is very unlikely that you have a box hardware problem.
All box are tested during manufacture and before sale. |
Pixel v1 had skhynix ic, is that supported with easy jtag socket? I am using windows 7 pack 1, is easy jtag plus compatible with win7? If there is any hardware problem in box will it be replaced? I'll still try on some other working phones as well after giving back customers phone.
Quote:
Originally Posted by layder It is very unlikely that you have a box hardware problem.
All box are tested during manufacture and before sale. |
Sir thank you for your support, finally micromax q372 emmc connected with socket :
q372 emmc logs:
Setting interface to EasyJtag2/E-Socket
Setting bus width to 8 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 90014A48384731650507DD0938AE52E7
EMMC CSD: D02701320F5903FFFFFFFFEF8A4040D3
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H8G1e , EMMC NAME (HEX): 483847316500 , S/N: DD0938AE , rev. 0x07
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 5/2015
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G1e_DD0938AE_20181027_185017.extcsd
EMMC Init completed.
Warning: Health report is very BAD
Device Life Time Estimation (MLC) [269]: 0x08 70% - 80% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x01 Normal
Get firmware version
Brand = Micromax
Manufacturer = Micromax
Model = Micromax Q372
Phone platform = mt6582
CPU Abi = armeabi-v7a
Mediatek platform = MT6582
Android release = 5.0
Firmware version = ALPS.L0.MP2.V1_TINNO6582.WT.L_P18
Firmware date = Sat Aug 22 18:57:42 CST 2015
Please suggest how to repair?