View Single Post
Old 11-11-2018, 18:08   #672 (permalink)
Nasir Mobiles
No Life Poster
 
Nasir Mobiles's Avatar
 
Join Date: Sep 2006
Location: ---> Hope
Posts: 2,028
Member: 355782
Status: Offline
Thanks Meter: 1,265
Tecno K8 Dead Boot repaired




Code:
Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 2749 mV
CMD Active Level: 2808 mV
EMMC Device Information :
EMMC CID: 150100514536334D42031C0DD007B48F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: QE63MB , HEX: 514536334D42 , S/N: 1C0DD007 , rev. 0x03
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 11/2017
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QE63MB_1C0DD007_20181111_204411.extcsd
EMMC Init completed.

Opening file: MT6737M_Android_scatter.txt

The new format of scatter
config_version: V1.1.2
platform: MT6737M
preloader_rlk6737m_35g_n.bin
Found 4 supported eMMC CID:
name = 'FE62MB'     hex = 0x464536324D42     [SAMSUNG]
name = 'EHAEE8'     hex = 0x454841454538     [KINGSTONE]
name = 'QE63MB'     hex = 0x514536334D42     [SAMSUNG]
name = 'HAG4a2'     hex = 0x484147346132     [SKHYNIX]
H9TQ17ABJTACUR/16GB @BGA221

The size of the last section has been updated

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 2749 mV
CMD Active Level: 2808 mV
EMMC Device Information :
EMMC CID: 150100514536334D42031C0DD007B48F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: QE63MB , HEX: 514536334D42 , S/N: 1C0DD007 , rev. 0x03
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 11/2017
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QE63MB_1C0DD007_20181111_204431.extcsd
EMMC Init completed.

Operation: Write by vendor (MediaTek)

Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0003A3DF7E00
GPT-partitioning done

Partition name: preloader
Filename: preloader_rlk6737m_35g_n.bin , Offset: 000000000000 , filesize: 126300 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 722.34 KB/s

Writing DL_Info...
Writing DL_Info done

Writing eMMC Register ...
Reg: 179  Value: 0x48
Reg: 177  Value: 0x00
Reg: 162  Value: 0x01

All done   time: [00:00:05:386]

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 36 Mhz
CMD Pullup Level: 2750 mV
CMD Active Level: 2808 mV
EMMC Device Information :
EMMC CID: 150100514536334D42031C0DD007B48F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: QE63MB , HEX: 514536334D42 , S/N: 1C0DD007 , rev. 0x03
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 11/2017
   EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: QE63MB_1C0DD007_20181111_204500.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: proinfo, [000000080000 - 000000380000], size: 000000300000 (3.00 MB)
Partition: nvram, [000000380000 - 000000880000], size: 000000500000 (5.00 MB)
Partition: protect1, [000000880000 - 000001280000], size: 000000A00000 (10.0 MB)
Partition: protect2, [000001280000 - 000001C80000], size: 000000A00000 (10.0 MB)
Partition: lk, [000001C80000 - 000001D00000], size: 000000080000 (512. KB)
Partition: para, [000001D00000 - 000001D80000], size: 000000080000 (512. KB)
Partition: boot, [000001D80000 - 000002D80000], size: 000001000000 (16.0 MB)
Partition: recovery, [000002D80000 - 000003D80000], size: 000001000000 (16.0 MB)
Partition: logo, [000003D80000 - 000004580000], size: 000000800000 (8.00 MB)
Partition: expdb, [000004580000 - 000004F80000], size: 000000A00000 (10.0 MB)
Partition: seccfg, [000004F80000 - 000005000000], size: 000000080000 (512. KB)
Partition: oemkeystore, [000005000000 - 000005200000], size: 000000200000 (2.00 MB)
Partition: secro, [000005200000 - 000005800000], size: 000000600000 (6.00 MB)
Partition: keystore, [000005800000 - 000006000000], size: 000000800000 (8.00 MB)
Partition: tee1, [000006000000 - 000006500000], size: 000000500000 (5.00 MB)
Partition: tee2, [000006500000 - 000006A00000], size: 000000500000 (5.00 MB)
Partition: frp, [000006A00000 - 000006B00000], size: 000000100000 (1.00 MB)
Partition: nvdata, [000006B00000 - 000008B00000], size: 000002000000 (32.0 MB)
Partition: metadata, [000008B00000 - 00000B000000], size: 000002500000 (37.0 MB)
Partition: system, [00000B000000 - 00010B000000], size: 000100000000 (4.00 GB)
Partition: cache, [00010B000000 - 000124000000], size: 000019000000 (400. MB)
Partition: userdata, [000124000000 - 0003A2D80000], size: 00027ED80000 (9.98 GB)
Partition: flashinfo, [0003A2D80000 - 0003A3D80000], size: 000001000000 (16.0 MB)
GPT header successfully parsed

Get firmware version

Brand = TECNO
Manufacturer = TECNO
Model = TECNO K8
Phone platform = mt6737m
CPU Abi = armeabi-v7a
Mediatek platform = MT6737W
Android release = 7.0
Firmware version = K8-H3722ABCDE-N-180205V108
Firmware date = Mon Feb  5 17:27:05 CST 2018
  Reply With Quote
The Following 3 Users Say Thank You to Nasir Mobiles For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.06941 seconds with 7 queries