| UNLOCK INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via Server' button for direct unlock, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.
To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.
Operation: Unlock
Selected model: SM-G530T
Software version: 34.3
Checking Login and Password... OK
Ballance: 19 crd.
You have 19 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G530T
Android version: 5.1.1
PDA version: G530TUVU1AOF8
CSC version: G530TTMB1AOF8
Phone version: G530TUVU1AOF8
Product code: SM2G530TZAATMB
CSC country code: USA
CSC sales code: TMB
Phone SN: R28H21GXAWF
IMEI: 359128069952600
HW version: REV0.1
RF cal date: 2016.02.16
Chip name: MSM8916
Modem board: MSM8916
Boot Warranty bit: 1
SIM State: ABSENT
Checking Super user right... true
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM5 detected
Reading data from phone... OK
Calculating... OK
Searching server... error
could not connect to server
Done with Samsung Tool PRO v.34.3 |