| SAMSUNG J327p u3 Unlock Done No Need Cadit
SAMSUNG J327p u3 Unlock Done No Need Cadit
UNLOCK INSTRUCTIONS:
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.
To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.
Operation: Read SPC
Selected model: SM-J327P
Software version: 34.3
Waiting ADB device... OK
Reading phone info...
Model: SM-J327P
Android version: 6.0.1
PDA version: J327PVPU3AQL3
CSC version: J327PSPT3AQL3
Phone version: J327PVPU3AQL3
Product code: Not Active
CSC country code: USA
CSC sales code: SPR
Phone SN: 00000000000
IMEI: 359102085597376
HW version: J327P.03
RF cal date: 2017.06.15
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2017-12-01
Boot Warranty bit: 1
SIM State: CARD_IO_ERROR
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
SPC: 537437
Done with Samsung Tool PRO v.34.3
UNLOCK INSTRUCTIONS:
Domestic Unlock:
1. Power on the phone.
2. Enable 'USB debugging' in 'Settings'-'Developer options',
tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock Domestic' button.
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.
To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.
Operation: Unlock
Selected model: SM-J327P
Software version: 34.3
Waiting ADB device... OK
Reading phone info...
Model: SM-J327P
Android version: 6.0.1
PDA version: J327PVPU3AQL3
CSC version: J327PSPT3AQL3
Phone version: J327PVPU3AQL3
Product code: Not Active
CSC country code: USA
CSC sales code: SPR
Phone SN: 00000000000
IMEI: 359102085597376
HW version: J327P.03
RF cal date: 2017.06.15
Chip name: MSM8937
Modem board: MSM8917
Security patch: 2017-12-01
Boot Warranty bit: 1
SIM State: CARD_IO_ERROR
Searching Samsung diag port... detected COM139
Writing data to phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.34.3 |