SAMSUNG J1 J100H DEAD BOOT REPAIR DONE
eMMC_tool Suite ver. 1.5.2.0 (release date: 06.08.2018)
Microsoft Windows 10 (64 bit) build 17134 (10.0.17134.376)
Looking for EasyJTAG box...
EasyJTAG API ver. 2100
EasyJTAG Box Serial = 12FFB00CE943D81E
Card Serial = AA26xxxx
EasyJTAG Box Firmware = 1.63
Setting frequence to 14 Mhz
CMD Pullup Level: 1794 mV
CMD Active Level: 2701 mV
EMMC Device Information :
EMMC CID: 90014A48344732621101CECB09BC422E
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: CECB09BC , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 4/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_CECB09BC_20181125_205221.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: SBOOT, [000000400000 - 000000600000], size: 000000200000 (2.00 MB)
Partition: SBOOT2, [000000600000 - 000000800000], size: 000000200000 (2.00 MB)
Partition: wfixnv1, [000000800000 - 000000900000], size: 000000100000 (1.00 MB)
Partition: wfixnv2, [000000900000 - 000000A00000], size: 000000100000 (1.00 MB)
Partition: tdfixnv1, [000000A00000 - 000000B00000], size: 000000100000 (1.00 MB)
Partition: tdfixnv2, [000000B00000 - 000000C00000], size: 000000100000 (1.00 MB)
Partition: WDSP, [000000C00000 - 000001000000], size: 000000400000 (4.00 MB)
Partition: MODEM, [000001000000 - 000001800000], size: 000000800000 (8.00 MB)
Partition: MODEM2, [000001800000 - 000002000000], size: 000000800000 (8.00 MB)
Partition: TDDSP, [000002000000 - 000002400000], size: 000000400000 (4.00 MB)
Partition: FOTA_SIG, [000002400000 - 000002500000], size: 000000100000 (1.00 MB)
Partition: wruntimenv1, [000002500000 - 000002600000], size: 000000100000 (1.00 MB)
Partition: wruntimenv2, [000002600000 - 000002700000], size: 000000100000 (1.00 MB)
Partition: tdruntimenv1, [000002700000 - 000002800000], size: 000000100000 (1.00 MB)
Partition: tdruntimenv2, [000002800000 - 000002900000], size: 000000100000 (1.00 MB)
Partition: PARAM, [000002900000 - 000002B00000], size: 000000200000 (2.00 MB)
Partition: efs, [000002B00000 - 000003F00000], size: 000001400000 (20.0 MB)
Partition: prodnv, [000003F00000 - 000004400000], size: 000000500000 (5.00 MB)
Partition: RESERVED2, [000004400000 - 000004500000], size: 000000100000 (1.00 MB)
Partition: KERNEL, [000004500000 - 000005500000], size: 000001000000 (16.0 MB)
Partition: RECOVERY, [000005500000 - 000006500000], size: 000001000000 (16.0 MB)
Partition: CSC, [000006500000 - 000012D00000], size: 00000C800000 (200. MB)
Partition: system, [000012D00000 - 000053D00000], size: 000041000000 (1.02 GB)
Partition: HIDDEN, [000053D00000 - 000056500000], size: 000002800000 (40.0 MB)
Partition: userdata, [000056500000 - 0000E8100000], size: 000091C00000 (2.28 GB)
GPT header successfully parsed
Get firmware version
Brand = samsung
Manufacturer = samsung
Model = SM-J100H
Phone platform = sc8830
CPU Abi = armeabi-v7a
Android release = 4.4.4
Firmware version = KTU84P.J100HXXU0AOB4
Firmware date = Wed Feb 11 11:15:08 KST 2015