| J108a Cedar network unlock done.
RUNNING v 1.1431/01.15/UNI
CARD SERIAL 00156659
USBFLASH DRIVER VERSION 03.02.00.00
CFG:000000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP: LOCKED:1 CID:81 PAF:1 IMEI:01248600689367 CERT:RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Model (from GDFS): J108a
MAPP CXC article: R7EA011 prg1239-0153_APAC_HO
MAPP CXC version: R7EA011
Language Package: TELSTRA
CDA article: 1241-4310
CDA version: R10A
Default article: 1239-0196
Default version: R7EA011
NETWORK LOCKED
PROVIDER: 505-01
SECURITY UNITS BACKUP CREATED
Elapsed: 8 seconds
CFG:000000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP: LOCKED:1 CID:81 PAF:1 IMEI:01248600689367 CERT:RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Insert MEMORY CARD into phone
Insert TEST SIM CARD into phone
POWER ON phone
After setup complete, POWER OFF phone
Then proceed to Step 2
Elapsed: 9 seconds
CFG:000000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP: LOCKED:1 CID:81 PAF:1 IMEI:01248600689367 CERT:RED
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
Insert MEMORY CARD into phone
Insert TEST SIM CARD into phone
POWER ON phone
Set "USB MODE" in phone settings to "File transfer"
Copy file from CARD folder other\executor.b to :
C:\Setool\backup\01248600689367
POWER OFF phone
Then proceed to Step 3
Elapsed: 10 seconds
CFG:000000000000
ChipID: F100, EMP protocol: 0401
PHONE DOMAIN: "RETAIL"
PHONE CID: 0081
OTP: LOCKED:1 CID:81 PAF:1 IMEI:01248600689367 CERT:RED
Checking for signature ...
Waiting for calculation process ...
RESPONSE: "SUCCESS" [1038]
LDR: 2010-03-02 18:05 1212-4656_DB3350_CS_LOADER_ACC_SDRAM_R2A096
LDR: 2010-03-02 18:06 1212-4655_DB3350_CS_LOADER_APP_SDRAM_R2A096
DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM19
PHONE READY TO PROCEED
EXECUTOR STARTED
SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM19
PHONE READY TO PROCEED
GOT SEED: 00F7FD02
ACTIVATION COMPLETED. USERCODE RESET TO "0000"
DO NOT DISCONNECT PHONE FROM CABLE
UNTIL PHONE TURNS ON BY ITSELF
Elapsed: 142 seconds |