Quote:
Originally Posted by Rajib sah  Disconnect Mobile...
Re-Put the Mobile Bettery...
Then Connect your Phone to Computer again....
Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
Get Mobile Port is: COM61
>>> Device driver identification:
MediaTek USB Port_V1632
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM81
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail |
Quote:
Originally Posted by Abdulrehmman Get Mobile Port is: COM219
>>> Device driver identification:
MediaTek USB Port
>>> Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash symbol: >>> Swich Mobile to Hight Speed Re\Wr Port...
Get Mobile Port is: COM220
>>> Device driver identification:
MediaTek DA USB VCOM (Android)
>>> Reading Mobile Map Data...Fail |
Please check emmc flash 1 and 2
And don’t hold point to GND while prosses just short pins for 5 sec and connect usb and disconnect point
Web.DYNET