View Single Post
Old 01-04-2019, 23:29   #8 (permalink)
lugnut2099
Junior Member
 
Join Date: Nov 2016
Posts: 5
Member: 2646068
Status: Offline
Thanks Meter: 0
For some reason, this doesn't work for me, but my situation is weird in general. I've basically given up on this phone long ago, but I decided to mess with it one last time. If anyone has any ideas that'd be most appreciated.

So I have "radio off"/no service. I also can't enable NFC, which may or may not be related. And to add to the fun, my MEID displays as 0000000000001, which is probably where my problem lies. It has no trouble reading SIM cards from all carriers, however, and even displays the correct carrier name as though it was connecting to the network.

So this is the info that displays in fastboot:
Quote:
AP Fastboot Flash Mode (Secure)
BL: BB.32 (sha-91d91c6, 2018-03-08 13:55:55)
Baseband: M8920_15000.280.06.58.05R PERRY_NA_CA_CUST
Product/Variant: perry XT1766 16GB P3B
Serial Number: ZY224N9TQM
CPU: MSM8920
eMMC: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=00000000000003
DRAM: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
Console [NULL]: null
Tools Mode Config: DISABLED
Battery OK
flashing_unlocked
Software status: Official
On the barcode screen, I have:
Quote:
IMEI/MEID: 256691840801319938
SKU: XT1766
DATE (mm-dd-yyyy): 11-24-2017
Serial Number: ZY224N9TQM
And after booting up and going to Settings, I have these key entries:
Quote:
Baseband: M8920_15000.280.06.58.05u

SIM STATUS:
Network: Unknown
Signal strength: 0
Cellular network type: Unknown
Service state: Radio off
Roaming: Not roaming
Cellular network state: Disconnected
My phone number - 417-438-xxxx

IMEI INFORMATION:
MIN: (varies)
PRL: (varies)
MEID: 00000000000001
So I know much of that is redundant or useless, but you notice the discrepancies? Why does the bootloader/fastboot detect the "R" change caused by changing the permissions, but I still get the "U" once booted? And perhaps more importantly, why is the IMEI still present on the barcode screen, but not when booted up? If memory serves, I had once wiped out the IMEI altogether while messing with it months ago and found it missing from the barcode screen as well, so I don't think it's just a static image that would show the original IMEI no matter what or anything...

So yeah, I'm stumped. It's almost like changing the permission did work as far as the bootloader is concerned, but for some reason the system when booted isn't reflecting it. Any ideas? Thanks in advance.
  Reply With Quote
 
Page generated in 0.15783 seconds with 6 queries