Quote:
Originally Posted by khan 25 Mobile Has Connect...
CPU_NAME: MT6763
>>> Reading Mobile Hardware Info...Success
HW_Inf: 8A00 SW_Inf: CA01
>>> Initialization Mobile ...>>> Sending Auth File To Mobile...Success
>>> Downloading Boot1 To Mobile Phone...Success
Mobile phone status:SYNC...
Mobile phone status swtich to :brom...Success
Make sure Mobile status has in :brom...
Init Mobile BOOT2 ...
=====================Flash Type(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
oppo f5 dead help shot test point
HELP................... |
HI
It seems that the ground is still connected to your testpoint, The main reason for disconnecting the ground from testpoint is to allow flash chip to be recognized.
The other day I was messing around with my F5 and dropped the resistor. I was getting the same errors as your. my phone is now alive after resolder back the resistor.