View Single Post
Old 01-14-2019, 23:06   #4 (permalink)
layder
Product Supporter
 
layder's Avatar
 
Join Date: Jun 2002
Location: Belarus
Age: 47
Posts: 3,187
Member: 13148
Status: Offline
Thanks Meter: 2,948
Quote:
Originally Posted by JefMaximo View Post
How to interpret it:

preloader_0_1.bin
Found 10 supported eMMC CID:
name = 'HAG2e' hex = 0x484147326505 [SKHYNIX]
name = 'QN16MB' hex = 0x514E31364D42 [SAMSUNG]
name = 'Q316AB' hex = 0x513331364142 [SAMSUNG]
name = 'Q313MB' hex = 0x513331334D42 [SAMSUNG]
name = 'F312MB' hex = 0x463331324D42 [SAMSUNG]
name = 'F722MB' hex = 0x463732324D42 [SAMSUNG]
name = 'Q31SMB' hex = 0x513331534D42 [SAMSUNG]
name = 'QE13MB' hex = 0x514531334D42 [SAMSUNG]
name = 'Q316BB' hex = 0x513331364242 [SAMSUNG]
name = 'FE12MB' hex = 0x464531324D42 [SAMSUNG]

"you can write ROM2 as backup of ROM2 at first page (eMMC general) - Select ROM to access, select file, write binary file"

But I dont have DUMP.

I will read about the function of preloader to understand the process.
If you not have dump, you can write firmware to phone with mediatek CPU via FlashTool

If you phone not connect as "MTK VCOM port", you need to desolder eMMC and check it, and write correct preloader from firmware using "Write by vendor" Tab at EasyJTAG plus software, also know as "eMMC Tool Shuite"
  Reply With Quote
The Following User Says Thank You to layder For This Useful Post:
 
Page generated in 0.10120 seconds with 7 queries