:::H30-U10 imwi repier error::: [Answered] Welcome to Octoplus Huawei Software v.1.0.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
2: COM8 USB Serial Port
2019-02-04 08:46:14 GMT -------------------------------------------------
Starting Connect
Selected phone model: MTK Android Device
Searching MTK Debug devices
Please "Power Off" the device and connect USB cable
Switching device to MTK Debug mode
Waiting for device loading
BaseBand chip: MT6582,S01
S/W version: ALPS.KK1.MP1.V2.42
H/W board version: S01
Error: General error.
BaseBand chip: MT6582, E01
S/W version: MOLY.WR8.W1315.MD.WG.MP.V37.P9
H/W board version: HUAWEI82_CWET_KK_HSPA_HW
IMEI A: FFFFFFFFFFFFFFF
IMEI B: FFFFFFFFFFFFFFF
Connect done.
Performed by 1.0.5 Software version.
2019-02-04 08:47:06 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: 111111111111119
New IMEI B: 111111111111119
Reading secure data...
Repair Info failed.
Performed by 1.0.5 Software version. |