Code:
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. If you have one file firmware, then you must check 'Use one package file' option.
4. Check flashing options if needed (Repartition, EFS clear, Boot update).
5. Power on the phone in download mode (turn off phone, press vol.down + home + power).
6. Connect the phone to PC with USB cable, install drivers if needed.
7. Press 'Flash' button.
Operation: Flash
Selected model: SPH-L720T
Software version: 34.8
File analysis... OK
Total file size: 0x99A295C8 (2458 Mb)
Searching USB Flash interface... COM16 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending sbl2.mbn... OK
Sending sbl3.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending cache.img.ext4... OK
Sending hidden.img.ext4... OK
Sending modem.bin... OK
Sending NON-HLOS.bin... OK
Flashing done (time - 00:08:01)
Done with Samsung Tool PRO v.34.8