Hi, mates.
I had to remove FRP of one S5 NEO - G903F. After removing FRP, the phone went on bootloop. Restart over and over again at Samsung logo.
The firmware version of the phone was G903FXXU2BRH2. So I flashed the set with it's original version (by the way, with the one from the support area I had
hidden.img error, so I had to find another XXU2BRH2), but the set still reboot at logo. I did factory/wipe cache after flashing, everything, but again - bootloop. Im stuck, mates. Im flashing with latest bootloaders and the phone again stucks at logo! What else can I do to revive the set? Any ideas, mates? Here's the log.
Code:
Welcome to Octoplus Box Samsung software version 2.7.7
-----------------------------------------------------------------------------------
To connect SM-G903F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-G903F
Operation: Reset FRP - UserData
Reset FRP/ Reactivation lock operation for SM-G903F will delete all user data on the phone (contacts, pictures and others)!
NOTE: You can reset FRP/ Reactivation without losing user data via Factory Reset FRP/ Reactivation service.
Connecting to server...
Connecting to server...Ok!
Checking resource files...
Resource files already downloaded.
Please put the phone into Download Mode and connect USB cable.
To put SM-G903F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Waiting for phone...
Firmware write started.
Writing Custom section...
Custom section has been written successfully.
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 2.7.7.4 Software version.
Selected AP file: E:\GSM\Samsung\G\G903F\VD2-G903FXXU2BRH2-20181012094150\G903FXXU2BRH2_G903FVFG2BRH2_G903FXXU2BRH2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G903F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
Writing Firmware Failed
Performed by 2.7.7.4 Software version.
Selected AP file: E:\GSM\Samsung\G\G903F\G903FXXU2BRH2_G903FOXX2BRH2_G903FXXU2BRH2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G903F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.7.4 Software version.