SAMSUNG J327T FLASH DONE
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J327T
Software version: 34.8
File analysis... OK
Total file size: 0xB5A70BBA (2906 Mb)
Searching USB Flash interface... COM34 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending param.bin... OK
Sending cm.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending userdata.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Flashing done (time - 00:02:36)
Done with Samsung Tool PRO v.34.8