SAMSUNG G6000 FLASH DONE
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G6000
Software version: 34.8
File analysis... OK
Total file size: 0x75E0439C (1886 Mb)
Searching USB Flash interface... COM34 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending boot.img... OK
Sending cache.img.ext4... OK
Sending hyp.mbn... OK
Sending modem.bin... OK
Sending NON-HLOS.bin... OK
Sending recovery.img... OK
Sending rpm.mbn... OK
Sending sbl1.mbn... OK
Sending sec.dat... OK
Sending system.img.ext4... OK
Sending tz.mbn... OK
Flashing done (time - 00:02:50)
Done with Samsung Tool PRO v.34.8