View Single Post
Old 02-15-2019, 14:48   #42 (permalink)
shoaibansari.
Freak Poster
 
shoaibansari.'s Avatar
 
Join Date: Apr 2010
Location: lucknow u.p.india
Age: 35
Posts: 217
Member: 1284209
Status: Offline
Sonork: 100.1614938
Thanks Meter: 137
Quote:
Originally Posted by ALLNEWGSM View Post
the second one not done also stuck at oppo logo

2 phone bricked with easy jtag

---------- eMMC Device Information ----------

eMMC CID : 150100514536334D4203A3A7E4CE75EC
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 07/2018 Rev.0x3
eMMC NAME: QE63MB , S/N: 2745689294
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
------ Android information ------
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB)
Read EXT fs info
Read EXT fs info
Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
Format EXT fs...
Returned 28...
Read EXT fs info
NEW Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB)
Read EXT fs info
Read EXT fs info
Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
Format EXT fs...
Returned 28...
Read EXT fs info
NEW Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
---------------------------------------------
Done.

Z3X EasyJtag Software ver. 3.4.0.2
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0F00E00C0D23EDA9, ,FW Ver.: 01.63
CMD Pullup Level:1722 mV
CMD Active Level:2609 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D4203A3A7E4CE75EC
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 07/2018 Rev.0x3
eMMC NAME: QE63MB , S/N: 2745689294
eMMC NAME (HEX): 514536334D42
IC Name: Samsung , KMQE60013M-B318/16GB @BGA221
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 1D1F000 sectors 14.6 GiB
Soft (Partitioned) Disk/Image size: 1D1EFBC sectors 14.6 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 30535646
Partition info successfully found
------ Android information ------
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB)
Read EXT fs info
Read EXT fs info
Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
Format EXT fs...
Returned 28...
Read EXT fs info
NEW Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
Detected LINUX(Android) USERDATA : 0x0158000000 (9.184GB)
Read EXT fs info
Read EXT fs info
Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
Format EXT fs...
Returned 28...
Read EXT fs info
NEW Created filesystem with parameters:
Size: 268435456
Block size: 1024
Blocks per group: 32768
Inodes per group: 2048
Inode size: 256
Inodes: 16384
Label:
---------------------------------------------
Done.
just wipe in recovery
  Reply With Quote
 
Page generated in 0.08162 seconds with 7 queries