View Single Post
Old 03-06-2019, 07:20   #5 (permalink)
iArkAt8
Freak Poster
 
iArkAt8's Avatar
 
Join Date: Apr 2012
Location: KU.mahabad
Posts: 137
Member: 1744310
Status: Offline
Sonork: 100.1617232
Thanks Meter: 43
founded another alive yt2-830l
Section GP1 does not exist on eMMC !!!



Setting frequence to 21 Mhz
CMD Pullup Level: 1722 mV
CMD Active Level: 1794 mV
EMMC Device Information :
EMMC CID: 15010041574D4233520180F3EC5BA1E4
EMMC CSD: D02701320F5903FFF6DBFFEF92404008
EMMC Manufacture : SAMSUNG , EMMC NAME: AWMB3R , HEX: 41574D423352 , S/N: 80F3EC5B , rev. 0x01
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 10/2014
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: AWMB3R_80F3EC5B_20190306_094925.extcsd
EMMC Init completed.

Scanning soft partitions
GPT header is found and is valid
Partition: reserved, [000000005000 - 000000805000], size: 000000800000 (8.00 MB)
Partition: ESP, [000000805000 - 000002905000], size: 000002100000 (33.0 MB)
Partition: boot, [000002905000 - 000003905000], size: 000001000000 (16.0 MB)
Partition: recovery, [000003905000 - 000004D05000], size: 000001400000 (20.0 MB)
Partition: fastboot, [000004D05000 - 000005D05000], size: 000001000000 (16.0 MB)
Partition: reserved_1, [000005D05000 - 000006505000], size: 000000800000 (8.00 MB)
Partition: panic, [000006505000 - 000008505000], size: 000002000000 (32.0 MB)
Partition: factory, [000008505000 - 000028505000], size: 000020000000 (512. MB)
Partition: misc, [000028505000 - 000028D05000], size: 000000800000 (8.00 MB)
Partition: config, [000028D05000 - 000030D05000], size: 000008000000 (128. MB)
Partition: cache, [000030D05000 - 000038D05000], size: 000008000000 (128. MB)
Partition: logs, [000038D05000 - 000048D05000], size: 000010000000 (256. MB)
Partition: system, [000048D05000 - 0000C8D05000], size: 000080000000 (2.00 GB)
Partition: data, [0000C8D05000 - 0003A3600000], size: 0002DA8FB000 (11.4 GB)
GPT header successfully parsed

Get firmware version

Brand = Lenovo
Manufacturer = LENOVO
Device = YT2
Model = YOGA Tablet 2-830L
Phone platform = baytrail
CPU Abi = x86
Android release = 4.4.2
Firmware version = KOT49H.YT2-830L_USR_S000153_1501051824_WW21_ROW dev-keys
Firmware date = Mon Jan 5 18:35:03 CST 2015

Setting frequence to 21 Mhz
CMD Pullup Level: 1701 mV
CMD Active Level: 1784 mV
EMMC Device Information :
EMMC CID: 15010041574D4233520180F3EC5BA1E4
EMMC CSD: D02701320F5903FFF6DBFFEF92404008
EMMC Manufacture : SAMSUNG , EMMC NAME: AWMB3R , HEX: 41574D423352 , S/N: 80F3EC5B , rev. 0x01
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 10/2014
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: AWMB3R_80F3EC5B_20190306_094941.extcsd
EMMC Init completed.

Operation: Try to read table from emmc

Vendor: Intel
Searching GPT ...
GPT header is found and is valid
Checking for ROM2 ...
ROM2 is blank
Checking for ROM3 ...
ROM3 is blank
Section GP1 does not exist on eMMC !!!
GPT header successfully parsed


bootloader_gp1 on read by vendor 0b

Last edited by iArkAt8; 03-06-2019 at 07:26.
  Reply With Quote
 
Page generated in 0.10094 seconds with 7 queries