| i have same problem
eMMC_tool Suite ver. 1.5.2.0 (release date: 06.08.2018)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2100
EasyJTAG Box Serial = 0900301095CE53A5
Card Serial = AAAA6B50
EasyJTAG Box Firmware = 1.63
Changelog:
06.08.2018 (ver 1.5.2.0)
Fix: Bugs that have been found through your crash report
Fix: Writing ROM2 for Samsung (Write by vendor)
Fix: Freezing the program on a RandomVerify
Add: Folder for saving to Explorer (in settings)
Add: Extract from store.vol from emmc (explorer)
Add: Automatic repair of damaged store.vol when extracting (Explorer)
Add: Adding MountPoints for partitions (efs, userdata) when formatting
Add: Checking for an empty EFS before backup (Read by Vendor Samsung)
Setting frequence to 21 Mhz
CMD Pullup Level: 711 mV
CMD Active Level: 1557 mV
EMMC Device Information :
EMMC CID: 65646F4D204D4F521281000002400152
EMMC CSD: D07FFF320F59007FF6DB80001E40001C
EMMC Manufacture : , EMMC NAME: MMOR , HEX: 4D004D4F5200 , S/N: 00000240 , rev. 0x81
EMMC Manufacture ID: 0x65 , OEM ID: 0x6F , Device Type: Device (removable) , Date: 0/2014
EMMC ROM 1 (Main User Data) Capacity: 128 MB (000008000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 KB (000000020000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC BootArea Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG]: 0x78 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x03
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: MMOR_00000240_20190312_163351.extcsd
EMMC Init completed.
eMMC are unusable. |