GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

wahiditunes · 03-13-2019, 19:26

Platform: SAMSUNG
Selected model: SM-N920C
To put SM-N920C into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.6.6.0 Software version.

03-13-2019, 19:26	#3591 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Platform: SAMSUNG Selected model: SM-N920C To put SM-N920C into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM8 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.6.6.0 Software version.