GSM-Forum - View Single Post

n3vr · 03-15-2019, 00:48

I was able to unlock menus using spc and enable diag. I thought I remembered reading in this forum that LG can be done easy so long as diag port is enabled. But inside gcprokey it still goes through the process where it wants to grab the spc and fails due to the new firmware. However with the spc being set to 000000 I thought I'd be able to do it anyway. At the least I figuered I would be able to access a menu where I could unlock it with the nck code but maybe I was wrong. Here is what I have: nck=9101021316937638 spc=859655 otksl=916804

Thanks.

03-15-2019, 00:48	#1 (permalink)
n3vr Junior Member Join Date: Feb 2018 Posts: 39 Member: 2816155 Status: Offline Thanks Meter: 2	LS777 on ZVH diag port enabled I was able to unlock menus using spc and enable diag. I thought I remembered reading in this forum that LG can be done easy so long as diag port is enabled. But inside gcprokey it still goes through the process where it wants to grab the spc and fails due to the new firmware. However with the spc being set to 000000 I thought I'd be able to do it anyway. At the least I figuered I would be able to access a menu where I could unlock it with the nck code but maybe I was wrong. Here is what I have: nck=9101021316937638 spc=859655 otksl=916804 Thanks.