GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

djmurod86 · 03-19-2019, 09:42

Platform: SAMSUNG
Selected model: SM-N920C
To put SM-N920C into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.6.7.0 Software version.

Platform: SAMSUNG
Selected model: SM-N920C
To put SM-N920C into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM9
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.6.7.0 Software version.

03-19-2019, 09:42	#3631 (permalink)
djmurod86 No Life Poster Join Date: Feb 2007 Location: Inside Posts: 4,133 Member: 455852 Status: Offline Sonork: 100.1596308 Thanks Meter: 1,993	Samsung N920C Reset FRP DONE Platform: SAMSUNG Selected model: SM-N920C To put SM-N920C into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Operation was canceled Performed by 1.6.7.0 Software version. Platform: SAMSUNG Selected model: SM-N920C To put SM-N920C into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM9 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.6.7.0 Software version.