HUAWEI_P8_Lite_(PRA-LA1)_emmc_direct_pinout
https://www.4shared.com/photo/jauAzS...A1__emmc_.html Tested Report.....
3/27/2019 8:36:11 PM>
Looking for EasyJTAG box...
EasyJTAG API ver. 2201
Setting IO Levels to 1.8V
Setting frequence to 21 Mhz
EasyJTAG Box Serial = 10007022E9040C38
EasyJTAG Box Firmware = 1.63
Setting frequence to 21 Mhz
CMD Pullup Level: 1753 mV
CMD Active Level: 1753 mV
eMMC Init returned = 0
EMMC Device Information :
EMMC CID: 150100524531424D420DD2ED6818140A
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RE1BMB , HEX: 524531424D42 , S/N: D2ED6818 , rev. 0x0D
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 1/2017
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x02 , width 8bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RE1BMB_D2ED6818_20190327_203613.extcsd
EMMC Init completed.