Quote:
Originally Posted by shoaibrao  Respected Easy Jtag Team Need Help Please About This Error
" EMMC RPMB Status: 7, Reason: RPMB Authentication key not yet programmed "
I Tried Many Firmwares But Same Problem
Need Help Please
Code: ---------- eMMC Device Information ----------
eMMC CID : 150100525836344D4203F5DEC2883413
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 03/2017 Rev.0x3
eMMC NAME: RX64MB , S/N: 4125016712
eMMC NAME (HEX): 525836344D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB Status: 7, Reason: RPMB Authentication key not yet programmed
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: RX64MB_4125016712_20190328_1533.extcsd
Partition info successfully found
Found Data areas (firmware parts) count is: 36
---------------------------------------------
P0 (BOOT_PARA) [0x8000 0x100000] Size: 1.0MB
P1 (RECOVERY) [0x108000 0x2000000] Size: 32.0MB
P2 (PARA) [0x2108000 0x80000] Size: 512.0KB
P3 (RESERVE1) [0x2188000 0x200000] Size: 2.0MB
P4 (RESERVE2) [0x2388000 0x1000000] Size: 16.0MB
P5 (RESERVE3) [0x3388000 0x200000] Size: 2.0MB
P6 (RESERVE4) [0x3588000 0x1000000] Size: 16.0MB
P7 (OPPO_CUSTOM) [0x4588000 0x100000] Size: 1.0MB
P8 (EXPDB) [0x4688000 0x1400000] Size: 20.0MB
P9 (FRP) [0x5a88000 0x100000] Size: 1.0MB
P10 (NVCFG) [0x5b88000 0x2000000] Size: 32.0MB
P11 (NVDATA) [0x7b88000 0x4000000] Size: 64.0MB
P12 (METADATA) [0xbb88000 0x2000000] Size: 32.0MB
P13 (PROTECT1) [0xdb88000 0x800000] Size: 8.0MB
P14 (PROTECT2) [0xe388000 0xc78000] Size: 12.468MB
P15 (SECCFG) [0xf000000 0x800000] Size: 8.0MB
P16 (PERSIST) [0xf800000 0x3000000] Size: 48.0MB
P17 (SEC1) [0x12800000 0x200000] Size: 2.0MB
P18 (PROINFO) [0x12a00000 0x300000] Size: 3.0MB
P19 (MD1IMG) [0x12d00000 0x4000000] Size: 64.0MB
P20 (MD1DSP) [0x16d00000 0x1000000] Size: 16.0MB
P21 (SPMFW) [0x17d00000 0x100000] Size: 1.0MB
P22 (SSPM_1) [0x17e00000 0x100000] Size: 1.0MB
P23 (SSPM_2) [0x17f00000 0x100000] Size: 1.0MB
P24 (GZ1) [0x18000000 0x1000000] Size: 16.0MB
P25 (GZ2) [0x19000000 0x1000000] Size: 16.0MB
P26 (NVRAM) [0x1a000000 0x4000000] Size: 64.0MB
P27 (LK) [0x1e000000 0x100000] Size: 1.0MB
P28 (LK2) [0x1e100000 0x100000] Size: 1.0MB
P29 (BOOT) [0x1e200000 0x2000000] Size: 32.0MB
P30 (LOGO) [0x20200000 0x800000] Size: 8.0MB
P31 (TEE1) [0x20a00000 0x500000] Size: 5.0MB
P32 (TEE2) [0x20f00000 0x500000] Size: 5.0MB
P33 (RESERVE_EXP1) [0x21400000 0x400000] Size: 4.0MB
P34 (SYSTEM) [0x21800000 0x158000000] Size: 5.375GB
P35 (RESERVE_EXP2) [0x179800000 0x400000] Size: 4.0MB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0021800000 (5.375GB)
Build ID: N6F26Q
Release Incremental ID: 1510852707
Release Base ID: 7.1.1
Architecture ABI: arm64-v8a
Device manufacturer: OPPO
Device Platform: mt6763
Build Description: full_oppo6763_17031-user 7.1.1 N6F26Q 1510852707 release-keys
Device Model: OPPO CPH1723
Device Name: CPH1723
Product ID: oppo6763_17031
Display Build ID: CPH1723EX_11_A.07_171116
---------------------------------------------
Done.
@NoName®
Respected Sir
Need Help Please
Thanks Anticipation |
Hello , did you found word
error in log ? I dont see any error in your logs. Where is a error ?