GSM-Forum - View Single Post - world first itel s31 stuck on logo fix by jtag write protect remove

nessyb · 04-12-2019, 21:41

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC F822MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100463832324D42004C2790E0C34F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : F822MB
Product revision : 0.0
Product serial number : (hex) 4C2790E0
Manufacturing date : 12/2016
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF92404009
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 5087232 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/F822MB_12_04_2019_22_20_05.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 0000000F) 7.5 KB
P01: (0000000F, 1FFFFFFF2) 4096 GB
P02: (0000000F, 1FFFFFFF2) 4096 GB
P03: para (0001E900, 00000400) 512 KB
P04: logo (0001ED00, 00004000) 8 MB
P05: expdb (00022D00, 00005000) 10 MB
P06: frp (00027D00, 00000800) 1024 KB
P07: nvdata (00028500, 00010000) 32 MB
P08: metadata (00038500, 00013B00) 39.38 MB
P09: oemkeystore (0004C000, 00001000) 2048 KB
P10: secro (0004D000, 00003000) 6 MB
P11: keystore (00050000, 00004000) 8 MB
P12: system (00054000, 005AC000) 2904 MB
P13: cache (00600000, 00080000) 256 MB
P14: userdata (00680000, 01696C00) 11.29 GB
P15: flashinfo (01D16C00, 00008000) 16 MB
P16: ???????????? (200000000000000, 7D7F7FF8FC04FC01) 1.711e+10 GB
P17: ???????????? (200000000000000, 7D7F7FF8FC04FC01) 1.711e+10 GB
P18: �e?�??????� (FF00FFFF10FE6900, FF00FFEF058000) 1.705e+10 GB
P19: ??ute?�R? (FFFFFF00FFDF9400, FF0001FF001F8900) 1.047e+06 GB
P20: (FFFFFFFFFFFFFFFF, 00000001) 512 b
P21: (FFFFFFFFFFFFFFFF, 00000001) 512 b
EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD_12_04_2019_22_20_41.bin.
File open failed.

Switched to boot area partition 2.
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/Samsung eMMC F822MB_12_04_2019_22_30_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
sW: 1.7.6; FW: 1.24.
Remove write protect successfully completed. <<<<<<<<<<<<<<<<<<<<<<<<write protect remove
Disconnected.

Smart report info:

Hash code: 00000000000000000000000000000000000000000000000000 00000000000000

Super block size : 0x00000000 Bytes
Super page size : 0x00000000 Bytes
Optima write size : 0x00000000 Bytes
Number of banks : 0
Bank0 init bad block : 0
Bank0 runtime bad block : 0
Bank0 remain reserved block : 0
Max erase count : 0
Min erase count : 0
Avg erase count : 0
Read reclaim count : 0
Optimal trim size : 0x00000000 Bytes
Max erase count (SCL) : 0
Min erase count (SCL) : 0
Avg erase count (SCL) : 0
Max erase count (MLC) : 0
Min erase count (MLC) : 0
Avg erase count (MLC) : 0
SW: 1.7.6; FW: 1.24.

Switched to boot area partition 1.

ERROR[011]: Read error.
At sector 32
Attempting to read...
Added partition BOOT1 to constructor file.

Switched to boot area partition 2.
Added partition BOOT2 to constructor file.

Switched to user area.
Added partition GPT to constructor file.
Added partition nvdata to constructor file.
Added partition oemkeystore to constructor file.
Added partition flashinfo to constructor file.
SRF "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/itel_s31.srf" has been installed successfully.
Partition table has been found on device.

Switched to boot area partition 1.
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/Samsung eMMC F822MB_12_04_2019_22_30_05.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 1.7.6; FW: 1.24.
Please select file.

Switched to boot area partition 2.
Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/Samsung eMMC F822MB_12_04_2019_22_30_29.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:01
SW: 1.7.6; FW: 1.24.
Remove write protect successfully completed.
Disconnected.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto

Connecting...
Device : Samsung eMMC F822MB
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB (14910.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100463832324D42004C2790E0C34F
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : F822MB
Product revision : 0.0
Product serial number : (hex) 4C2790E0
Manufacturing date : 12/2016
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF92404009
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes

Partition config : (0x48) 01001000
Boot partition enable : Boot partition 1
(Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x01) RST_n signal is permanently enabled

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 5087232 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/F822MB_12_04_2019_22_30_52.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.7.6; FW: 1.24.
P00: GPT (00000000, 00000400) 512 KB
P01: proinfo (00000400, 00001800) 3072 KB
P02: nvram (00001C00, 00002800) 5 MB
P03: protect1 (00004400, 00005000) 10 MB
P04: protect2 (00009400, 00005000) 10 MB
P05: seccfg (0000E400, 00000200) 256 KB
P06: lk (0000E600, 00000300) 384 KB
P07: boot (0000E900, 00008000) 16 MB
P08: recovery (00016900, 00008000) 16 MB
P09: para (0001E900, 00000400) 512 KB
P10: logo (0001ED00, 00004000) 8 MB
P11: expdb (00022D00, 00005000) 10 MB
P12: frp (00027D00, 00000800) 1024 KB
P13: nvdata (00028500, 00010000) 32 MB
P14: metadata (00038500, 00013B00) 39.38 MB
P15: oemkeystore (0004C000, 00001000) 2048 KB
P16: secro (0004D000, 00003000) 6 MB
P17: keystore (00050000, 00004000) 8 MB
P18: system (00054000, 005AC000) 2904 MB
P19: cache (00600000, 00080000) 256 MB
P20: userdata (00680000, 01696C00) 11.29 GB
P21: flashinfo (01D16C00, 00008000) 16 MB
Partition table has been found on device.

Switched to boot area partition 1.
Added partition BOOT1 to constructor file.

Switched to boot area partition 2.
Added partition BOOT2 to constructor file.

Switched to user area.
Added partition proinfo to constructor file.
SRF "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/itel sxxxx_s31.srf" has been installed successfully.

PHONE COME STUCK ON LOGO AND NOT ACCEPT RESET OR FORMAT

04-12-2019, 21:41	#1 (permalink)
nessyb No Life Poster Join Date: Jan 2013 Location: zimbabwe south africa Posts: 1,441 Member: 1866877 Status: Offline Sonork: 100.1681933 Thanks Meter: 707	world first itel s31 stuck on logo fix by jtag write protect remove Please disconnect battery and USB cable. Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Samsung eMMC F822MB Page size : 512 B Block size : 512 B Block count : 30535680 Size : 14.56 GB (14910.00 MB) --------------------------------------------------------------- CID Info CID : 150100463832324D42004C2790E0C34F Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : F822MB Product revision : 0.0 Product serial number : (hex) 4C2790E0 Manufacturing date : 12/2016 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF92404009 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x48) 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 5087232 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/F822MB_12_04_2019_22_20_05.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.6; FW: 1.24. P00: GPT (00000000, 0000000F) 7.5 KB P01: (0000000F, 1FFFFFFF2) 4096 GB P02: (0000000F, 1FFFFFFF2) 4096 GB P03: para (0001E900, 00000400) 512 KB P04: logo (0001ED00, 00004000) 8 MB P05: expdb (00022D00, 00005000) 10 MB P06: frp (00027D00, 00000800) 1024 KB P07: nvdata (00028500, 00010000) 32 MB P08: metadata (00038500, 00013B00) 39.38 MB P09: oemkeystore (0004C000, 00001000) 2048 KB P10: secro (0004D000, 00003000) 6 MB P11: keystore (00050000, 00004000) 8 MB P12: system (00054000, 005AC000) 2904 MB P13: cache (00600000, 00080000) 256 MB P14: userdata (00680000, 01696C00) 11.29 GB P15: flashinfo (01D16C00, 00008000) 16 MB P16: ???????????? (200000000000000, 7D7F7FF8FC04FC01) 1.711e+10 GB P17: ???????????? (200000000000000, 7D7F7FF8FC04FC01) 1.711e+10 GB P18: �e?�??????� (FF00FFFF10FE6900, FF00FFEF058000) 1.705e+10 GB P19: ??ute?�R? (FFFFFF00FFDF9400, FF0001FF001F8900) 1.047e+06 GB P20: (FFFFFFFFFFFFFFFF, 00000001) 512 b P21: (FFFFFFFFFFFFFFFF, 00000001) 512 b EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD_12_04_2019_22_20_41.bin. File open failed. Switched to boot area partition 2. Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/Samsung eMMC F822MB_12_04_2019_22_30_29.bin file... Reading. Please wait... Done. Elapsed time 00:00:01 sW: 1.7.6; FW: 1.24. Remove write protect successfully completed. <<<<<<<<<<<<<<<<<<<<<<<<write protect remove Disconnected. Smart report info: Hash code: 00000000000000000000000000000000000000000000000000 00000000000000 Super block size : 0x00000000 Bytes Super page size : 0x00000000 Bytes Optima write size : 0x00000000 Bytes Number of banks : 0 Bank0 init bad block : 0 Bank0 runtime bad block : 0 Bank0 remain reserved block : 0 Max erase count : 0 Min erase count : 0 Avg erase count : 0 Read reclaim count : 0 Optimal trim size : 0x00000000 Bytes Max erase count (SCL) : 0 Min erase count (SCL) : 0 Avg erase count (SCL) : 0 Max erase count (MLC) : 0 Min erase count (MLC) : 0 Avg erase count (MLC) : 0 SW: 1.7.6; FW: 1.24. Switched to boot area partition 1. ERROR[011]: Read error. At sector 32 Attempting to read... Added partition BOOT1 to constructor file. Switched to boot area partition 2. Added partition BOOT2 to constructor file. Switched to user area. Added partition GPT to constructor file. Added partition nvdata to constructor file. Added partition oemkeystore to constructor file. Added partition flashinfo to constructor file. SRF "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/itel_s31.srf" has been installed successfully. Partition table has been found on device. Switched to boot area partition 1. Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/Samsung eMMC F822MB_12_04_2019_22_30_05.bin file... Reading. Please wait... Done. Elapsed time 00:00:01 SW: 1.7.6; FW: 1.24. Please select file. Switched to boot area partition 2. Opening C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/Samsung eMMC F822MB_12_04_2019_22_30_29.bin file... Reading. Please wait... Done. Elapsed time 00:00:01 SW: 1.7.6; FW: 1.24. Remove write protect successfully completed. Disconnected. Please disconnect battery and USB cable. Model Settings: Interface : eMMC Voltage : 1.8V Bus Mode : 1 bit Bus speed : Auto Connecting... Device : Samsung eMMC F822MB Page size : 512 B Block size : 512 B Block count : 30535680 Size : 14.56 GB (14910.00 MB) --------------------------------------------------------------- CID Info CID : 150100463832324D42004C2790E0C34F Manufacturer ID : 0X15 Device/BGA : BGA (Discrete embedded) OEM/Application ID : 0X00 Product name : F822MB Product revision : 0.0 Product serial number : (hex) 4C2790E0 Manufacturing date : 12/2016 --------------------------------------------------------------- CSD Info CSD : D02701320F5903FFF6DBFFEF92404009 CSD structure : CSD version No. 1.2 SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5, 4.51, 5.0, 5.01, 5.1 Data read access time1: 15 ms TRAN speed : 26 MHz READ block length : 512 Bytes WP group enable : YES PERM_WRITE_PROTECT : NO TMP_WRITE_PROTECT : NO --------------------------------------------------------------- EXTCSD Info Revision 1.7 (for MMC v5.0, v5.01) Erase block size : 512 Kbytes Boot1 size : 4096 Kbytes Boot2 size : 4096 Kbytes RPMB size : 4096 Kbytes Partition config : (0x48) 01001000 Boot partition enable : Boot partition 1 (Bus width = 1Bit) Boot ACK : Boot acknowledge sent during boot operation Bit Boot bus conditions : (0x00) 00000000 Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default) Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default) Boot mode : Use single data rate + backward compatible timings in boot operation (default) RST_n function : (0x01) RST_n signal is permanently enabled Partitioning support : Device supports partitioning features Enhanced attribute : Device can have enhanced technological features in partitions and user data area. Max enhanced data size: 5087232 Kbytes Partitions attribute : 0x0 Part setting completed: 0x0 GP partition 1 size : 0 b GP partition 2 size : 0 b GP partition 3 size : 0 b GP partition 4 size : 0 b Enhanced area size : (0x0) 0 b Enhanced area start : (0x0) 0 b ---------------------------------------------------------------Searching Android build info... Not found --------------------------------------------------------------- Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/F822MB_12_04_2019_22_30_52.bin. Connect successful. --------------------------------------------------------------- SW: 1.7.6; FW: 1.24. P00: GPT (00000000, 00000400) 512 KB P01: proinfo (00000400, 00001800) 3072 KB P02: nvram (00001C00, 00002800) 5 MB P03: protect1 (00004400, 00005000) 10 MB P04: protect2 (00009400, 00005000) 10 MB P05: seccfg (0000E400, 00000200) 256 KB P06: lk (0000E600, 00000300) 384 KB P07: boot (0000E900, 00008000) 16 MB P08: recovery (00016900, 00008000) 16 MB P09: para (0001E900, 00000400) 512 KB P10: logo (0001ED00, 00004000) 8 MB P11: expdb (00022D00, 00005000) 10 MB P12: frp (00027D00, 00000800) 1024 KB P13: nvdata (00028500, 00010000) 32 MB P14: metadata (00038500, 00013B00) 39.38 MB P15: oemkeystore (0004C000, 00001000) 2048 KB P16: secro (0004D000, 00003000) 6 MB P17: keystore (00050000, 00004000) 8 MB P18: system (00054000, 005AC000) 2904 MB P19: cache (00600000, 00080000) 256 MB P20: userdata (00680000, 01696C00) 11.29 GB P21: flashinfo (01D16C00, 00008000) 16 MB Partition table has been found on device. Switched to boot area partition 1. Added partition BOOT1 to constructor file. Switched to boot area partition 2. Added partition BOOT2 to constructor file. Switched to user area. Added partition proinfo to constructor file. SRF "C:/Program Files (x86)/Medusa Pro Software/firmwareFolder/itel sxxxx_s31.srf" has been installed successfully. PHONE COME STUCK ON LOGO AND NOT ACCEPT RESET OR FORMAT Last edited by nessyb; 04-12-2019 at 21:48.