GSM-Forum - View Single Post - GCPro Exclusive Frequently Asked Questions

stanner_austin · 04-15-2019, 13:55

Question
How to unlock Samsung sprint most model with GCPro?

Answer.(Box or dongle same steps)

Make sure you are using Latest update.
Select model any (samsung usb serial port J327P U3 temp unlock or N900P Only.. ##3424# to enable diag. You can read SPC without select diag and once you have SPC enable diag and continue for Unlocking.)
Method 1 If phone firmware is combination or combination modem is used in samsung tab, select Sprint Unlock & press Start
Method 2 if phone is stock firmware & newer then last 3 digit PDx[x=0 to anything ] You must root phone. in samsung tab, select sprint unlock & press start.
For S9/S9+ if firmware is U3= REV 3 or newer flash combination modem from support area before continue. Note NO NEED TO SELECT ANY PORT JUST NEED TO ENABLE IT NOT SELECT.
For sprint spc/msl read only, you can use UART method SPC/AKEY or use sprint unlock without root.

Note:S9/S9+ SPRINT is via credits only supported at moment. http://forum.gsmhosting.com/vbb/f922...018-a-2371739/
Note2:J337,J727P U3,J737P,NOTE9,S10 SPRINT is not supported.

04-15-2019, 13:55	#13 (permalink)
stanner_austin No Life Poster Join Date: Jan 2004 Location: Unknown Age: 39 Posts: 9,227 Member: 49752 Status: Offline Sonork: QQ:1474246528 Thanks Meter: 6,085	Question How to unlock Samsung sprint most model with GCPro? Answer.(Box or dongle same steps) Make sure you are using Latest update. Select model any (samsung usb serial port J327P U3 temp unlock or N900P Only.. ##3424# to enable diag. You can read SPC without select diag and once you have SPC enable diag and continue for Unlocking.) Method 1 If phone firmware is combination or combination modem is used in samsung tab, select Sprint Unlock & press Start Method 2 if phone is stock firmware & newer then last 3 digit PDx[x=0 to anything ] You must root phone. in samsung tab, select sprint unlock & press start. For S9/S9+ if firmware is U3= REV 3 or newer flash combination modem from support area before continue. Note NO NEED TO SELECT ANY PORT JUST NEED TO ENABLE IT NOT SELECT. For sprint spc/msl read only, you can use UART method SPC/AKEY or use sprint unlock without root. Note:S9/S9+ SPRINT is via credits only supported at moment. http://forum.gsmhosting.com/vbb/f922...018-a-2371739/ Note2:J337,J727P U3,J737P,NOTE9,S10 SPRINT is not supported. Last edited by stanner_austin; 08-11-2019 at 11:20.