| thanks raisalina
Samsung J7 Prime G6100 FRP done
Setting frequence to 21 Mhz
CMD Pullup Level: 1990 mV
CMD Active Level: 2629 mV
EMMC Device Information :
EMMC CID: 150100525831424D4210F61CC20A836A
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RX1BMB , HEX: 525831424D42 , S/N: F61CC20A , rev. 0x10
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2016
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RX1BMB_F61CC20A_20190516_170825.extcsd
EMMC Init completed.
Get firmware version
Brand = samsung
Manufacturer = samsung
Device = on7xltechn
Model = SM-G6100
Phone platform = msm8953
CPU Abi = arm64-v8a
Android release = 8.0.0
Firmware version = R16NW.G6100ZHU2CRI8
Firmware date = Sun Sep 30 08:52:46 KST 2018
Setting frequence to 21 Mhz
CMD Pullup Level: 1980 mV
CMD Active Level: 2619 mV
EMMC Device Information :
EMMC CID: 150100525831424D4210F61CC20A836A
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RX1BMB , HEX: 525831424D42 , S/N: F61CC20A , rev. 0x10
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2016
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x38 , Boot from: ROM1 (Main User Area)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RX1BMB_F61CC20A_20190516_170838.extcsd
EMMC Init completed.
Operation: Remove FRP
Searching GPT ...
GPT header is found and is valid
FRP partition found (partname: persistent)
Erasing FRP partition ...
Done erasing partition.
All done |