View Single Post
Old 05-30-2019, 17:49   #1 (permalink)
UnReality
Freak Poster
 
UnReality's Avatar
 
Join Date: Jan 2004
Posts: 320
Member: 48396
Status: Offline
Thanks Meter: 82
www.unlockpark.com - need feedback

Hi everyone!

I used this service unlockpark.com - S8 S8 PLUS G950F / G955F IMEI REPAIR,BAD,BLACKLISTED REPAIR SINGLE SiM. (CPID) 3rd time. First two times it was no problem, G950F and G965FD was repaired successfully, updated to latest Android 9 fw and worked as it should.
Now I used this service for G955F. IMEI was repaired, sim count was changed from single to dual (it's not a problem), but after I flash it from v4 combination to regular first or latest Android 9 fw there is no IMEIs. Tried G955FXXS4DSE1 and G955FXXU4DSE4 with no luck. After downgrade it to Android 8 G955FXXS4CRLB fw IMEIs are back and phone is in working condition. I contacted guy who did it and he told "it’s problem on your software". What sw? I used latest ODIN v3.13.3 and tried latest z3x sw too - result is same. Firmwares was downloaded via SamFirm sw and from sammobile site. There is no any info phone can't be upgraded to Android 9 after imei repair.
So is there someone used this service for Samsung G955F imei repair? What I'm doing wrong? Is there a fix for this problem? What should I do, ask full/partial refund or what? I promised to my client a phone will work without any restrictions after imei repair. Otherwise I could use cert patch procedure via Chimera tool, which is cheaper and now works with Android 9.




<ID:0/020> Added!!
<ID:0/020> Odin engine v(ID:3.1303)..
<ID:0/020> File analysis..
<ID:0/020> Total Binary size: 5748 M
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> NAND Write Start!!
<ID:0/020> SingleDownload.
<ID:0/020> sboot.bin
<ID:0/020> param.bin
<ID:0/020> up_param.bin
<ID:0/020> cm.bin
<ID:0/020> boot.img
<ID:0/020> recovery.img
<ID:0/020> system.img
<ID:0/020> userdata.img
<ID:0/020> modem.bin
<ID:0/020> Transmission Complete..
<ID:0/020> Now Writing.. Please wait about 2 minutes
<ID:0/020> Receive Response from boot-loader
<ID:0/020> modem_debug.bin
<ID:0/020> Transmission Complete..
<ID:0/020> Now Writing.. Please wait about 2 minutes
<ID:0/020> Receive Response from boot-loader
<ID:0/020> cache.img
<ID:0/020> omr.img
<ID:0/020> RQT_CLOSE !!
<ID:0/020> RES OK !!
<ID:0/020> Removed!!
<ID:0/020> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

  Reply With Quote
 
Page generated in 0.08782 seconds with 7 queries