Prestigio PSP3510DUO Write Flash Done
Code:
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-05-05
Build Time : 1500618749
Product Model : PSP3510DUO
Product Brand : Prestigio
Product Name : PSP3510DUO
Product Device : DTE50B8L
Product Board : SC7731C
Display ID : PSP3510DUO.20170721.1.0.04
Product Manfct : Prestigio
Board Platform : sc8830
Product Info : PSP3510DUO
Product Info : rs617a
UserData : STATE : ENCRYPTION
Code:
Operation : Flash Firmware [ v2.00r2 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : RS6172_PRESTIGIO_7731m_B18_B2.0F0.3_G_F81_V06_20170920.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x19
PMTMng : Update PMT Ok!
CODE : prodnv.img
ERASE : UBOOT
UBOOT : u-boot-spl-16k.bin
CODE : wmodem.bin
CODE : wdsp.bin
CODE : wcnmodem.bin
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : persist.img
CODE : sysinfo.img
FSIMG : userdata.img
CODE : logo_boot.bmp
CODE : low_battery_warning.bmp
ERASE : WRUNTIMENV1
ERASE : WCNRUNTIMENV1
FSIMG : cache.img
ERASE : MISC
UBOOT : u-boot.bin
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:05:34
Code:
Operation : Format FS / Reset Settings [ v2.00r2 ]
Mode : Default [ Reset Settings + FRP ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : RS6172_PRESTIGIO_7731m_B18_B2.0F0.3_G_F81_V06_20170920.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:29