| ITEL A14 FLASH DONE SPD/USC Module [SP2] v2.00r2
Card found : 5B5B5BXX , v0137
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.00r2
Open : A14-SA215-8.1-OP-V031-20190301.pac
VER : BP_R1.0.0
LEN : 0x57218EA5
CPU : sp7731e_1h20
VER : A14-SA215-8.1-OP-V031-20190301
Reading package ...
Read package finished!
Patch Level : OPM2.171019.012
Display ID : A14-SA215-8.1-OP-V031-20190301
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-02-05
Build Time : 1551432243
Product Model : itel A14
Product Brand : Itel
Product Name : SA215
Product Device : itel-A14
Product Manfct : ITEL MOBILE LIMITED
Product Info : itel A14
Product Board : sp7731e_1h20
Board Platform : sp7731e
Operation : Flash Firmware [ v2.00r2 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : A14-SA215-8.1-OP-V031-20190301.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!
CODE : prodnv.img
ERASE : UBOOT
UBOOT : u-boot-spl-16k-sign.bin
CODE : vbmeta-sign.img
CODE : SC9600_pike2_pubcp_PLD_base_nv_modem.dat
CODE : delta_nv.bin
CODE : PIKE2_DM_DSP.bin
CODE : pike2_cm4.bin
CODE : gnssbdmodem.bin
CODE : gnssmodem.bin
CODE : PM_pike2_cm4.bin
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : userdata.img
CODE : logo.bmp
CODE : logo.bmp
FSIMG : cache.img
FSIMG : vendor.img
ERASE : W_RUNTIMENV1
ERASE : MISC
CODE : tos-sign.bin
CODE : sml-sign.bin
UBOOT : u-boot-sign.bin
FSIMG : persist.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:05:52 |