View Single Post
Old 07-07-2019, 21:36   #868 (permalink)
Oyetunde Semiu
No Life Poster
 
Join Date: Feb 2018
Location: Nigeria
Posts: 932
Member: 2812901
Status: Offline
Thanks Meter: 305
Nokia 230 rm 1172 Reset code done by infinity-best

Card found: S/N : F61C9Axx , v0136
Registered to: TUNDE

Connect phone on selected interface...

Phone found!
MTKx Nokia Phone detected
Read info... Ok


Phone disconected!

Connect phone on selected interface...


Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 30 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 2DAFB46F12160C48B4EFB17C2B6C36B6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...



Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 30 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 2DAFB46F12160C48B4EFB17C2B6C36B6
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...
  Reply With Quote
The Following 2 Users Say Thank You to Oyetunde Semiu For This Useful Post:
 
Page generated in 0.09150 seconds with 6 queries