 p900 via testpoint "Not ready to receive"
hello
Ive just recieved a p900 that had been wrongly flashed to p910
I boot the phone by testpoint
when i try to flash avr, cruiser says:
Not ready to receive
could you help me?
i tried to flash with P910a_Phone_CXC162022_R3E001.AVR.flp and P910u_Phone_CXC162022_R4A006.AVR.flp also (downloaded from the p900 to p910 conversion directory)
when i tried to flash i tried to turn on options like "disable OTP imei check" and "relock RSA" ...everytime the same problem.
i attach the phone manually (i select p900) in "standard (wait) mode
do you have any clue what is wrong?
i also tried to rebuild security zone and upload some p900 GDFS backup found here on forum... didnt help
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
RSA protection feature inactive.
Bypassing authority check...
Initializing phone hardware...
Baudrate = 230400Bd
Phone hardware initialized OK
Firmware: Unidentified
RSA area is empty and MUST BE REFLASHED!
Flash file: "P910u_Phone_CXC162022_R4A006.AVR.flp"
Waiting for flash file to load...
Removing non-RSA area data...
The flash file is monolithic!
Sending flash applet...
Flash file: "P910u_Phone_CXC162022_R4A006.AVR.flp"
Waiting for flash file to load...
Analyzing firmware...
Preparing firmware...
New-lock type firmware detected...
Sending flash applet...
Flash file: "P910u_Phone_CXC162022_R4A006.AVR.flp"
Waiting for flash file to load...
Analyzing firmware...
Preparing firmware...
New-lock type firmware detected...
Sending flash applet...
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Time spent entering bootstrap: 0s
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Time spent entering bootstrap: 0s
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Time spent entering bootstrap: 0s
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
RSA protection feature inactive.
Bypassing authority check...
Trying CID29 applet...
RSA protection feature inactive.
Initializing phone hardware...
Baudrate = 230400Bd
Phone hardware initialized OK
Firmware: Unidentified
Flash file: "P910u_Phone_CXC162022_R4A006.AVR.flp"
Waiting for flash file to load...
Sending flash applet...
Flash file: "P910u_Phone_CXC162022_R4A006.AVR.flp"
Waiting for flash file to load...
Analyzing firmware...
Preparing firmware...
New-lock type firmware detected...
Sending flash applet...
Flash file: "P910u_Phone_CXC162022_R4A006.AVR.flp"
Waiting for flash file to load...
Analyzing firmware...
Preparing firmware...
New-lock type firmware detected...
Sending flash applet...
Uploading LowAccess applet...
Failed!
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
RSA protection feature inactive.
Bypassing authority check...
Initializing phone hardware...
Baudrate = 230400Bd
Phone hardware initialized OK
Firmware: Unidentified
RSA area is empty and MUST BE REFLASHED!
Flash file: "P910a_Phone_CXC162022_R3E001.AVR.flp"
Waiting for flash file to load...
Sending flash applet...
Script error: Not ready to receive [5.02.26]
regards,
nographix |