GSM-Forum - View Single Post - Post here succesfull JTAG and eMMC operations with Easy-Jtag:

kashif_malik · 07-15-2019, 16:33

Z3X EasyJtag Software ver. 3.5.0.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63
CMD Pullup Level:2072 mV
CMD Active Level:2640 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A484347386134A24D552014A508
eMMC CSD : D02701328F5903FFFFFFFFEF8A400026
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 10/2018 Rev.0xA2
eMMC NAME: HCG8a4 , S/N: 1297424404
eMMC NAME (HEX): 484347386134
EMMC ROM1 (Main User Data) Capacity: 59640 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 63482 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: HCG8a4_1297424404_20190715_2005.extcsd
Done.

Running:Reset PIN/PASS/GESTURE Locks
Z3X EasyJtag Software ver. 3.5.0.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63
CMD Pullup Level:2052 mV
CMD Active Level:2640 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A484347386134A24D552014A508
eMMC CSD : D02701328F5903FFFFFFFFEF8A400026
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 10/2018 Rev.0xA2
eMMC NAME: HCG8a4 , S/N: 1297424404
eMMC NAME (HEX): 484347386134
EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is not yet programmed (clear) or NO Error
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB
Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 122142686
Partition info successfully found
------ Android information ------
Detected LINUX(Android) USERDATA : 0x01B3282000 (51.442GB)
Mount EXT4 fs...
Unable to mount USER , code : 95
---------------------------------------------
Done.

Z3X EasyJtag Software ver. 3.5.0.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63
CMD Pullup Level:2062 mV
CMD Active Level:2640 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A484347386134A24D552014A508
eMMC CSD : D02701328F5903FFFFFFFFEF8A400026
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 10/2018 Rev.0xA2
eMMC NAME: HCG8a4 , S/N: 1297424404
eMMC NAME (HEX): 484347386134
EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is not yet programmed (clear) or NO Error
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB
Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 122142686
Partition info successfully found
------ Android information ------
Detected LINUX(Android) CACHE : 0x018B000000 (256.0MB)
Erasing...
Done.
Detected LINUX(Android) USERDATA : 0x01B3282000 (51.442GB)
Erasing...
Done.
---------------------------------------------
Done.

Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.5.0.1
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63
CMD Pullup Level:2062 mV
CMD Active Level:2382 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------

eMMC CID : 90014A484347386134A24D552014A508
eMMC CSD : D02701328F5903FFFFFFFFEF8A400026
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 10/2018 Rev.0xA2
eMMC NAME: HCG8a4 , S/N: 1297424404
eMMC NAME (HEX): 484347386134
EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is not yet programmed (clear) or NO Error
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Partition table scan:
GPT: present
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB
Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB
Logical sector size: 0x200 bytes
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
First usable sector: 34
Last usable sector: 122142686
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x018B000000 (256.0MB) , formatting...
Detected LINUX(Android) CONFIG : 0x019D180000 (32.0KB) formatting...
Detected LINUX(Android) USERDATA : 0x01B3282000 (51.442GB) , formatting...
Done.
Done.

07-15-2019, 16:33	#693 (permalink)
kashif_malik Freak Poster Join Date: Nov 2007 Location: Pakistan Posts: 333 Member: 628369 Status: Offline Sonork: 100.1609794 Thanks Meter: 48	Vivo Y95 pattern frp successfully done with easyjtag Z3X EasyJtag Software ver. 3.5.0.1 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63 CMD Pullup Level:2072 mV CMD Active Level:2640 mV Box IO Level:2800 mV CLK Rate:21000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- eMMC CID : 90014A484347386134A24D552014A508 eMMC CSD : D02701328F5903FFFFFFFFEF8A400026 eMMC Manufacturer ID: 0090 , OEM ID: 014A eMMC Date: 10/2018 Rev.0xA2 eMMC NAME: HCG8a4 , S/N: 1297424404 eMMC NAME (HEX): 484347386134 EMMC ROM1 (Main User Data) Capacity: 59640 MB EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is programmed and written 63482 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Backup saved: HCG8a4_1297424404_20190715_2005.extcsd Done. Running:Reset PIN/PASS/GESTURE Locks Z3X EasyJtag Software ver. 3.5.0.1 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63 CMD Pullup Level:2052 mV CMD Active Level:2640 mV Box IO Level:2800 mV CLK Rate:21000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- eMMC CID : 90014A484347386134A24D552014A508 eMMC CSD : D02701328F5903FFFFFFFFEF8A400026 eMMC Manufacturer ID: 0090 , OEM ID: 014A eMMC Date: 10/2018 Rev.0xA2 eMMC NAME: HCG8a4 , S/N: 1297424404 eMMC NAME (HEX): 484347386134 EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is not yet programmed (clear) or NO Error EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Partition table scan: GPT: present Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB Logical sector size: 0x200 bytes Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20 First usable sector: 34 Last usable sector: 122142686 Partition info successfully found ------ Android information ------ Detected LINUX(Android) USERDATA : 0x01B3282000 (51.442GB) Mount EXT4 fs... Unable to mount USER , code : 95 --------------------------------------------- Done. Z3X EasyJtag Software ver. 3.5.0.1 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63 CMD Pullup Level:2062 mV CMD Active Level:2640 mV Box IO Level:2800 mV CLK Rate:21000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- eMMC CID : 90014A484347386134A24D552014A508 eMMC CSD : D02701328F5903FFFFFFFFEF8A400026 eMMC Manufacturer ID: 0090 , OEM ID: 014A eMMC Date: 10/2018 Rev.0xA2 eMMC NAME: HCG8a4 , S/N: 1297424404 eMMC NAME (HEX): 484347386134 EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is not yet programmed (clear) or NO Error EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Partition table scan: GPT: present Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB Logical sector size: 0x200 bytes Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20 First usable sector: 34 Last usable sector: 122142686 Partition info successfully found ------ Android information ------ Detected LINUX(Android) CACHE : 0x018B000000 (256.0MB) Erasing... Done. Detected LINUX(Android) USERDATA : 0x01B3282000 (51.442GB) Erasing... Done. --------------------------------------------- Done. Running:Format FRP Partition... Z3X EasyJtag Software ver. 3.5.0.1 Loading eMMC GEN1 Firmware... IO: 2800 mV Box S/N: 0C00200394B8F938, ,FW Ver.: 01.63 CMD Pullup Level:2062 mV CMD Active Level:2382 mV Box IO Level:2800 mV CLK Rate:21000 kHz Bus Width:1bit,SDR HiPower mode is ON! ---------- eMMC Device Information ---------- eMMC CID : 90014A484347386134A24D552014A508 eMMC CSD : D02701328F5903FFFFFFFFEF8A400026 eMMC Manufacturer ID: 0090 , OEM ID: 014A eMMC Date: 10/2018 Rev.0xA2 eMMC NAME: HCG8a4 , S/N: 1297424404 eMMC NAME (HEX): 484347386134 EMMC ROM1 (Main User Data) Capacity: 59640 MB , 0x747C000 pages , 0xE8F800000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is not yet programmed (clear) or NO Error EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Partition table scan: GPT: present Found valid GPT with protective MBR; using GPT. Real (Hardware) Disk/Image size: 747C000 sectors 58.2 GiB Soft (Partitioned) Disk/Image size: 747BFBC sectors 58.2 GiB Logical sector size: 0x200 bytes Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20 First usable sector: 34 Last usable sector: 122142686 Partition info successfully found Formatting FRP... Detected LINUX(Android) CACHE : 0x018B000000 (256.0MB) , formatting... Detected LINUX(Android) CONFIG : 0x019D180000 (32.0KB) formatting... Detected LINUX(Android) USERDATA : 0x01B3282000 (51.442GB) , formatting... Done. Done.