View Single Post
Old 08-01-2019, 15:50   #59892 (permalink)
mbiborna
No Life Poster
 
mbiborna's Avatar
 
Join Date: May 2008
Posts: 2,834
Member: 770503
Status: Offline
Thanks Meter: 1,090
Himax H18 only supported by SCR

Code:
Operation : Identify [ v1.04 ]

----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ... 

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x60A6F6C6
BOOT_MODE : BOOTROM
Boot_CPU  : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV  : 0xFBA2A250
Boot done!

Identify : Code Integrity Check pass!

Device Info Details : 
[0] : sc6533g_XS35_E11_A
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : st7789/gc9304c/gc9305/ili9325/ili9341/gc9306/LGDP4535/nv3029e/otm3208/nv3029g/nv3029h/ili9340
[7] : bf3a01serial/gc6123/gc6133/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2018-01-17_18:20:19
[12] : E11_A22_HIMAX_V29

Done!
Elapsed: 00:00:29

Reconnect Power/Cable!
Code:
Operation : Read Flash [ v1.04 ]

----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ... 

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x70A6F6C6
BOOT_MODE : BOOTROM
Boot_CPU  : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV  : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details : 
[0] : sc6533g_XS35_E11_A
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : st7789/gc9304c/gc9305/ili9325/ili9341/gc9306/LGDP4535/nv3029e/otm3208/nv3029g/nv3029h/ili9340
[7] : bf3a01serial/gc6123/gc6133/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2018-01-17_18:20:19
[12] : E11_A22_HIMAX_V29

Saved to : C:\Users\mess\Desktop\
Saved as : SC6533G_4MiB_sc6533g_XS35_E11_A_E11_A22_HIMAX_V29_2018-01-17_182019.ilod


Done!
Elapsed: 00:00:36

Reconnect Power/Cable!

Code:
Operation : Read UserCode [ v1.04 ]
----- > Powered On : 
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off : 
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ... 

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x62A6F6C6
BOOT_MODE : BOOTROM
Boot_CPU  : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV  : 0xFBA2A250
Boot done!

Preparing PMT 
Verifying PMT 
Dump USERSPACE 
Open USERSPACE 
USERSPACE : 120
Check USERSPACE
Parse USERSPACE

CODE : 56325

Read done!

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!
  Reply With Quote
 
Page generated in 0.12139 seconds with 6 queries