GSM-Forum - View Single Post

alrsbs · 08-15-2019, 20:53

what is
?go to "Diag" menu and select "Enable" option.?

there is some solution for this ... not the spc code to enable the diagnostic port ... greetings

Please, type ##3424# to get SPC / MSL / Service Code...OK
Input , go to "Diag" menu and select "Enable" option.

Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS676
Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29-
2018+01
Short firmware version: ZVA
Kernel version: 3.10.49-g3285376-00001-g718184e
(lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP
PREEMPT Thu Mar 29 17:03:02 KST 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8909 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
Access violation at address 00000000. Read of address
00000000
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS676
Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29-
2018+01
Short firmware version: ZVA
Kernel version: 3.10.49-g3285376-00001-g718184e
(lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP
PREEMPT Thu Mar 29 17:03:02 KST 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8909 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input , go to "Diag" menu and select "Enable" option.
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS676
Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29-
2018+01
Short firmware version: ZVA
Kernel version: 3.10.49-g3285376-00001-g718184e
(lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP
PREEMPT Thu Mar 29 17:03:02 KST 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8909 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input , go to "Diag" menu and select "Enable" option.
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS676
Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29-
2018+01
Short firmware version: ZVA
Kernel version: 3.10.49-g3285376-00001-g718184e
(lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP
PREEMPT Thu Mar 29 17:03:02 KST 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8909 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input , go to "Diag" menu and select "Enable" option.
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.OK
Model ID: LGLS676
Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29-
2018+01
Short firmware version: ZVA
Kernel version: 3.10.49-g3285376-00001-g718184e
(lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP
PREEMPT Thu Mar 29 17:03:02 KST 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8909 0
Sending exploit...OK
Executing exploit...OK
Opening Hidden Menu...OK
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS676
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LGLS676
Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29-
2018+01
Short firmware version: ZVA
Kernel version: 3.10.49-g3285376-00001-g718184e
(lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP
PREEMPT Thu Mar 29 17:03:02 KST 201
Android version: 6.0.1
Hardware: Qualcomm Technologies, Inc MSM8909 0
Please, type ##3424# to get SPC / MSL / Service Code...OK
Input , go to "Diag" menu and select "Enable" option.
Performed by 2.9.5 Software version.

08-15-2019, 20:53	#1 (permalink)
alrsbs No Life Poster Join Date: Oct 2011 Location: srilanka Age: 32 Posts: 553 Member: 1674096 Status: Offline Thanks Meter: 49	ls676 unlock problem [Answered] what is ?go to "Diag" menu and select "Enable" option.? there is some solution for this ... not the spc code to enable the diagnostic port ... greetings Please, type ##3424# to get SPC / MSL / Service Code...OK Input , go to "Diag" menu and select "Enable" option. Welcome to Octoplus/Octopus Box LG Software version 2.9.5 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Performed by 2.9.5 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager. Performed by 2.9.5 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LGLS676 Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29- 2018+01 Short firmware version: ZVA Kernel version: 3.10.49-g3285376-00001-g718184e (lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 29 17:03:02 KST 201 Android version: 6.0.1 Hardware: Qualcomm Technologies, Inc MSM8909 0 Please, type ##3424# to get SPC / MSL / Service Code...Failed! Performed by 2.9.5 Software version. Access violation at address 00000000. Read of address 00000000 -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LGLS676 Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29- 2018+01 Short firmware version: ZVA Kernel version: 3.10.49-g3285376-00001-g718184e (lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 29 17:03:02 KST 201 Android version: 6.0.1 Hardware: Qualcomm Technologies, Inc MSM8909 0 Please, type ##3424# to get SPC / MSL / Service Code...OK Input , go to "Diag" menu and select "Enable" option. Performed by 2.9.5 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LGLS676 Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29- 2018+01 Short firmware version: ZVA Kernel version: 3.10.49-g3285376-00001-g718184e (lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 29 17:03:02 KST 201 Android version: 6.0.1 Hardware: Qualcomm Technologies, Inc MSM8909 0 Please, type ##3424# to get SPC / MSL / Service Code...OK Input , go to "Diag" menu and select "Enable" option. Performed by 2.9.5 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LGLS676 Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29- 2018+01 Short firmware version: ZVA Kernel version: 3.10.49-g3285376-00001-g718184e (lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 29 17:03:02 KST 201 Android version: 6.0.1 Hardware: Qualcomm Technologies, Inc MSM8909 0 Please, type ##3424# to get SPC / MSL / Service Code...OK Input , go to "Diag" menu and select "Enable" option. Performed by 2.9.5 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone... Please, reconnect phone, enable USB debugging, and try again. To enable USB debugging, please perform the following steps: 1. Disconnect cable 2. Install LG Android ADB drivers 3. Go to "Settings" -> "About phone" -> "Software information" 4. Click on Build number 5 times 5. Enable "Settings" -> "Developer options" -> "USB debugging" option 6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.OK Model ID: LGLS676 Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29- 2018+01 Short firmware version: ZVA Kernel version: 3.10.49-g3285376-00001-g718184e (lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 29 17:03:02 KST 201 Android version: 6.0.1 Hardware: Qualcomm Technologies, Inc MSM8909 0 Sending exploit...OK Executing exploit...OK Opening Hidden Menu...OK Performed by 2.9.5 Software version. -------------------------------------------------------------------------------- Checking data...OK Platform: LG Qualcomm Selected port: COM1 Selected model: LS676 Reading info... Initializing ADB...OK Waiting for phone...OK Model ID: LGLS676 Phone firmware version: LGLS676AT-00-ZVA-SPR-US-MAR-29- 2018+01 Short firmware version: ZVA Kernel version: 3.10.49-g3285376-00001-g718184e (lgmobile@LGEACI8R1) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Thu Mar 29 17:03:02 KST 201 Android version: 6.0.1 Hardware: Qualcomm Technologies, Inc MSM8909 0 Please, type ##3424# to get SPC / MSL / Service Code...OK Input , go to "Diag" menu and select "Enable" option. Performed by 2.9.5 Software version.