GSM-Forum - View Single Post

emilywilliamson · 10-09-2019, 06:49

Locate the 3-pin CMOS password reset jumper on the system board.
Remove the jumper plug from pins 1 and 2.
Place the jumper plug on pins 2 and 3 and wait approximately 5 seconds.
Replace the jumper plug on pins 1 and 2.

10-09-2019, 06:49	#5644 (permalink)
emilywilliamson Junior Member Join Date: Oct 2019 Location: London Posts: 6 Member: 2930478 Status: Offline Thanks Meter: 0	Help Locate the 3-pin CMOS password reset jumper on the system board. Remove the jumper plug from pins 1 and 2. Place the jumper plug on pins 2 and 3 and wait approximately 5 seconds. Replace the jumper plug on pins 1 and 2.