| same issue
Chinese Miracle II [SPD module] v 1.27
Operation : Check/Read Info [ v1.27 ]
Normal
Normal , 1 : Power On phone. Insert USB cable ( Normal USB cable )
Service
Service , 1 : Insert USB cable ( Use adapter or special cable )
Service , 2 : Insert battery
Service , 3 : If boot not start - press 'Power' button shortly
==== Wait for phone...
Phone found! [ 592 ]
Port Opened
Sync...
Normal Mode init
Sync...
Phone Initial Info :
Platform : MOCOR_16A.KING_W19.27.4_Release
ExtInfo : 10.00.17.02
HWInfo : SC6531EFM_BAR
Compile : 05-07-2019 14:48:12
Phone Security Info :
IMEI [1] : 355752106391987
IMEI [2] : 355752108391985
BT_ADDR : 000000000000
Done
Reconnect Power/Cable!
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 592 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )
Reconnect Power/Cable!
Operation : Read User Code [ v1.27 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 592 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )
Reconnect Power/Cable!
Operation : Read PhoneBook [ v1.27 ]
1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery
==== Wait for phone...
Phone found! [ 592 ]
Port Opened
Sync...
Initial Boot Failed!
Boot not done, reason : Wrong BootKeys
Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down )
Reconnect Power/Cable!
Operation : Read User Code [ v1.27 ]
Connect Powered Off phone. Insert battery ( If not used VPP )
==== Wait for phone...
Port Opened
Wait for phone ...
Device boot failed
Check Cable/Connection
Try again
Reconnect Power/Cable!
Set mode to : SPD6531
Operation : Check/Read Info [ v1.27 ]
Connect Powered Off phone. Insert battery ( If not used VPP )
==== Wait for phone...
Port Opened
Wait for phone ...
new sw
no detection |