| Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Operation was canceled
Performed by 1.8.0.0 Software version.
Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM275
Reading info...
Detected phone model: LG-M160
Mode: Emergency
Initializing..
SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0
Android version: 6.0.1
Platform: msm8909
Reading partition...
Detecting writing method...
Trying to repeat..
Trying third method...
Resetting FRP lock..
Trying to repeat..
Please, flash the M150x-M160x_Android_6.0.x_for_Reset_FRP.oct firmware file from Support Area ("LG/FOR UNLOCK AND REPAIR" folder), and then perform Reset FRP operation.
Performed by 1.8.0.0 Software version.
Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM275
Reading info...
Detected phone model: LG-M160
Mode: Emergency
Initializing..
SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0
Android version: 6.0.1
Platform: msm8909
Writing firmware...
Opening "M150x-M160x_Android_6.0.x_for_Reset_FRP.oct"...
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage.
Prepairing firmware...
Setting options...
Reading partition...
Formating USERDATA section
Formating ENCRYPT section
Writing signature...
Writing 1/2 section...
Writing 2/2 section...
Reading partition...
Formating RCT section
Formating MPT section
Finalizing...
Firmware Write successfully.
Performed by 1.8.0.0 Software version.
Platform: LG
Selected model: M160
Put the phone into Download Mode:
1. Power phone OFF;
2. Press and hold "Vol+" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM275
Reading info...
Detected phone model: LG-M160
Mode: Emergency
Initializing..
SW version: LGM160AT-00-V10m-EUR-XX-APR-11-2018+0
Android version: 6.0.1
Platform: msm8909
Reading partition...
Detecting writing method...
Trying to repeat..
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.8.0.0 Software version. |