View Single Post
Old 11-04-2019, 15:30   #946 (permalink)
Luckey1
No Life Poster
 
Luckey1's Avatar
 
Join Date: Jun 2014
Location: Infinity Box Team
Posts: 1,911
Member: 2197212
Status: Offline
Sonork: N/A
Thanks Meter: 595
Nokia C1-01

Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
PPM : rm607__06.15.ppm_mi
CNT : rm607__06.15.image_mi_059J840
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF

Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_2.5_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI : 355962040464689
PCcode : 0596379

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\355962040464689_XG 213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

===Flashing [PPM]===
File : rm607__06.15.ppm_mi
Image : package_mi.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:16
Write , Start : 0x41C00000 , Len : 0x0030A13C
Flashing , wait ...
Region flash done, time : 00:00:03
CRC check passed , 0xF370

===Flashing [CNT]===
File : rm607__06.15.image_mi_059J840
Image : package_mi_059J840.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42200000 , Len : 0x01C60000
Erasing, wait ...
Erase done, time : 00:01:38
Write , Start : 0x42200000 , Len : 0x00C80000
Flashing , wait ...
Region flash done, time : 00:00:16
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:07
No write data, skip
CRC check passed , 0xDC35

Flashing done!
Total flash time : 00:02:23
Reboot phone now...

Reading Phone Info....
Connected phone -
Software Info: V 06.15 25-11-11 RM-607 (c) Nokia
IMEI: 355962040464689
PPM version : V 06.15 25-11-11 RM-607 (c) Nokia MI
Product code: 0596379
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 39 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:03:12
Connect phone on selected interface...


Phone found!
Series 40 Device detected!
read info... - Ok
  Reply With Quote
The Following 2 Users Say Thank You to Luckey1 For This Useful Post:
 
Page generated in 0.19506 seconds with 6 queries