GSM-Forum - View Single Post - Huawei ‪ATU-L21‬ imei repair Done by one click

umairsahil786 · 11-05-2019, 10:11

Welcome to Octoplus Huawei Software v.‪1.1.1.13‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM15 USB Serial Port
3: COM3 Intel(R) Active Management Technology - SOL

2019-11-05 09:05:15 GMT -------------------------------------------------
Starting Auto detect

Detected ‪Qualcomm Android Device‬ at ‪COM7‬
Removing security protection...
Connecting to server...
Authorization is successful

Device Model: ‪ATU-L21‬
Boot: ‪Chipset-msm8917 8.0.0.33(031A)_SBL1‬
System: ‪System 8.0.0.073(00UG)‬
MEID: ‪00000000000000‬
PESN: ‪00000000‬
IMEI A: ‪
IMEI B: ‪
Bluetooth MAC: ‪34:2E:B6:C1:FC:3A‬
WiFi MAC: ‪34:2E:B6:C1:FC:39‬
S/N: ‪DKJ9X18B13W10718‬
Board S/N: ‪28B09P5411024011‬
Vendor Code: ‪hw‬
Country Code: ‪meafnaf‬

Auto detect done.
Performed by ‪1.1.1.13‬ Software version.

2019-11-05 09:06:55 GMT -------------------------------------------------
Starting Repair Info
New IMEI A: ‪
New IMEI B: ‪
Repairing IMEI A...
Repairing IMEI B...
Resetting your device

Repair Info done.
Performed by ‪1.1.1.13‬ Software version.

11-05-2019, 10:11	#1 (permalink)
umairsahil786 Freak Poster Join Date: May 2019 Location: Gujranwala Posts: 247 Member: 2909174 Status: Offline Sonork: 100.650600 Thanks Meter: 77	Huawei ‪ATU-L21‬ imei repair Done by one click Welcome to Octoplus Huawei Software v.‪1.1.1.13‬ To enable 'Manufacture' mode dial - for Qualcomm and Hisilicon based models: ##2846579## ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode - for MTK based models: ##14789632## ProjectMenu > Background Settings > USB Port Settings > Debug Mode To enable 'Fastboot' mode 1. Power off the phone. Remove SD and SIM cards 2. Press 'Vol-' and insert USB cable 3. Wait until phone enters 'Fastboot' mode To enable 'Upgrade' mode 1. Power off the phone. Remove SD and SIM cards 2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable 3. Wait until phone enters 'Upgrade mode' Found COM ports: 1: COM1 Communications Port 2: COM15 USB Serial Port 3: COM3 Intel(R) Active Management Technology - SOL 2019-11-05 09:05:15 GMT ------------------------------------------------- Starting Auto detect Detected ‪Qualcomm Android Device‬ at ‪COM7‬ Removing security protection... Connecting to server... Authorization is successful Device Model: ‪ATU-L21‬ Boot: ‪Chipset-msm8917 8.0.0.33(031A)_SBL1‬ System: ‪System 8.0.0.073(00UG)‬ MEID: ‪00000000000000‬ PESN: ‪00000000‬ IMEI A: ‪ IMEI B: ‪ Bluetooth MAC: ‪34:2E:B6:C1:FC:3A‬ WiFi MAC: ‪34:2E:B6:C1:FC:39‬ S/N: ‪DKJ9X18B13W10718‬ Board S/N: ‪28B09P5411024011‬ Vendor Code: ‪hw‬ Country Code: ‪meafnaf‬ Auto detect done. Performed by ‪1.1.1.13‬ Software version. 2019-11-05 09:06:55 GMT ------------------------------------------------- Starting Repair Info New IMEI A: ‪ New IMEI B: ‪ Repairing IMEI A... Repairing IMEI B... Resetting your device Repair Info done. Performed by ‪1.1.1.13‬ Software version.