IMO Q2 PLUS READ FW ERROR
Operation : Identify[/COLOR] [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Identify [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : O21019
Display ID : IMO_Q2_Plus_VFUK_3.0_180817
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-07-05
Build Time : 1534316701
Product Model : IMO Q2 Plus
Product Brand : IMO
Product Name : IMO_Q2_Plus_series
Product Device : IMO_Q2_Plus
Product Manfct : revoview
Product Info : sp9832e_1h10_go
Board Platform : sp9832e
Product Board : sp9832e_1h10_32b
UserData : STATE : ENCRYPTION
Done!
Elapsed: 00:01:31
Operation : Read FW [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
ERROR : BOOT ACK not received!
Error : Fail to init protocol!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read FW [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : IMO : IMO Q2 Plus
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
Make sure you have made "IDENTIFY" first!
Reconnect Power/Cable!